Page 1
MANUAL Mod. SWL R1000 ET / SW R 6200 BT Mod. SWL R1000 ET BIN-UP / SW R 6200 BT LIFT Mod. SWL R1000 ST / SW R 8300 SC Mod. SWL R1000 ST BIN-UP / SW R 8300 LIFT LAVORWASH S.p.A.
Page 2
SWEEPER Mod. SWL R1000 ET / SW R 6200 BT Mod. SWL R1000 ET BIN UP / SW R 6200 BT LIFT Mod. SWL R1000 ST / SWL R 8300 SC Mod. SW R1000 ST BIN-UP / SW R 8300 LIFT...
Page 3
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC CHAP. 1 General Informations Page CHAP. 2 Purposes / Intended Use Page CHAP. 3 Preparation (Unpacking) Page CHAP. 4 Acceptable Environmental Conditions Page CHAP.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC GENERAL INFORMATIONS ATTENTION: READ THIS INSTRUCTIONS MANUAL CAREFULLY BEFORE USING THE MACHINE LAVORWASH S.p.A. DISCLAIMS ALL LIABILITY FOR DAMAGE TO THINGS AND / OR INJURY TO PERSONS RESULTING FROM FAILURE TO COMPLY WITH THE INSTRUCTIONS IN THIS MANUAL AND FROM INCORRECT AND / OR IMPROPER MACHINE USE.
Page 5
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC PREPARATION (UNPACKING) After removing the outer packaging, remove the machine from the pallet; this operation can be done in two ways: Take a hook and 4 tie-rods of suitable lifting capacity for the weight of the machine (shown on the CE plate).
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC INTENDED AND FORBIDDEN USE INTENDED USE: The sweepers have been built to clean the residues left by machining operations, dust, dirt in general, from all...
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC TECHNICAL CHARACTERISTICS AND NOISE LEVEL CHAPTER 7 SWL R1000 ET SWL R1000 ST TECHNICAL FEATURES M.U. SW R 6200 BT SW R 8300 SC...
Page 8
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC The central brush Part. 2 Fig. 4 is the main machine component for loading the dust and waste into the collection bin. It is available in various...
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC ATTENTION: NEVER TOUCH THE SIDE BRUSH WITH YOUR HANDS AND NEVER PICK UP THREADED MATERIALS. SUCTION OFF KNOB: For all models. Fitted to both models Part. 1 Fig. 6. When this knob is pulled outwards, suction is disengaged. Disengage the suction every time the filters need shaking or when passing over damp areas (with the motor on).
Page 10
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC CHARGE INDICATOR: Part. 8 It indicates the charge level of batteries and it’s represented by three coloured lights (red, yellow and green); by turning on the ignition key Part. 6 they switch on in the following order: red-yellow-green; wait until green light is on before forwarding or reversing.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC CHAPTER 8 OPERATOR WORK STATION EMERGENCY STOP WORK STATION: The work station is shown in Fig. 12. IMPORTANT: For safety reasons, the machine switches off automatically if the operator moves from the driving seat or if the motor bonnet part.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC Make sure all connections (cable terminals, sockets, plugs, etc.) are always well tight and in good conditions Do not rest metal tools on the batteries.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC CAPITOLO 11 STARTING AND STOPPING ATTENTION PLEASE: BEFORE PROCEEDING MAKE SURE YOU HAVE READ ALL PREVIOUS CHAPTERS. SWL R1000 ET/SW R 6200 BT IMPORTANT: To start the machine, first of all sit in the driver's seat.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC CAPITOLO 12 CORRECT USE AND ADVICES IMPORTANT: Before starting work, make sure there are no strings, plastic or metal wires or long strips of cloth, sticks, power leads, etc.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC ADJUSTMENTS AND REPLACEMENTS CENTRAL BRUSH ADJUSTMENTS: If the machine starts cleaning in a faulty manner or leaves dirt around, it will have to be adjusted and lowered as followed: Position lever Part.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC SWL R1000 ST/SW R 8300 SC ATTENTION: When checking or replacing the motor oil, always wear protectives gloves, if possible made of nitrile with cotton lining;...
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC CHAPTER 16 DISMANTLING/DEMOLITION ATTENTION: Dismantling and demolition are a customer’s responsability. These operations must be performed in accordance with applicable regulations, handing the entire machine or its components to companies specialised in such services.
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC CHAPTER 18 TROUBLESHOOTING Two basic faults can effect: the machine raises dust during use, or leaves dirt on the floor; causes could be many but if the machine is carefully operated and routine maintenance is properly carried out, such faults will not occur.
Page 19
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC Page 19...
Page 20
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC Battery Version Page 20...
Page 21
Instructions and Operating Manual SWL R1000 ET/SW R 6200 BT – SWL R1000 ST/SW R 8300 SC Internal Conbustion Version Page 21...
Need help?
Do you have a question about the SWL R1000 ET and is the answer not in the manual?
Questions and answers