Safety Precautions - Vitek Xpress VT-KBD1 User Manual

VT-KBD1

SAFETY PRECAUTIONS

Before using the Xpress Keyboard, please ensure that you read and understand
the safety precautions described below.
Keyboard is operated correctly.
The safety precautions noted on the following pages are intended to instruct you
in the safe and correct operation of the Xpress Keyboard and its accessories to
prevent injuries or damage to the self, other persons and equipment.
In this Instruction Manual, the term "Keyboard", "Joystick", "equipment" and
"device" refers primarily to the Xpress Keyboard and its accessories such as
power supply, data junction box and cables.
WARNING
Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide. Disassembly or alteration may result in high
voltage electrical shock. Internal inspections, alterations and repairs should be
conducted by qualified service personnel authorized by the equipment distributor
or Vitek customer help desk.
Stop operating the equipment immediately if it emits smoke or noxious fumes.
Failure to do so may result in fire or electrical shock. Immediately remove the
power cable from the power outlet. Confirm that smoke and fume emissions
have ceased. Please consult the Xpress Keyboard distributor or the closest
Vitek customer help desk.
Stop operating the equipment if a heavy object is dropped or the casing is
damaged. Do not strike or shake. Failure to do so may result in fire or electrical
shock. Immediately unplug the power cord from the power outlet. Please
consult the Xpress Keyboard distributor or the closest Vitek customer help desk.
Do not allow the equipment come into contact with, or become immersed in,
water or other liquids. Do not allow liquids to enter the interior. The Xpress
Keyboard has not been waterproofed. If the exterior comes into contact with
liquids or salt air, wipe it dry with a soft, absorbent cloth. In the event that the
water or other foreign substances enter the interior, immediately unplug the
power cord from the power outlet. Continued use of the equipment may result in
fire or electrical shock. Please consult the Xpress Keyboard distributor or the
closest Vitek customer help desk.
Do not use substances containing alcohol, benzene, thinners or other flammable
substances to clean or maintain the equipment. The use of these substances
may lead to fire. Use a dry cloth on a regular periodic basis and wipe away the
dust and dirt that collects on the device. In dusty, humid or greasy environments,
the dust that collects around the ventilation or the slots on the outer casing over
long periods of time may become saturated with humidity and short-circuit,
leading to fire.
Do not cut, damage, alter or place heavy items on the power cord. Any of these
actions may cause an electrical short circuit, which may lead to fire or electrical
shock.
Always ensure that the Xpress
6