Advertisement
Quick Links
D12 | P/N: 81401541
The D12 is specifically designed for the delicate handling of small parts. Equipped with cutting-edge shallow field array
technology, it excels as an exceptional solution for effortlessly de-stacking and lifting thin materials, a task that often
proves challenging for conventional magnets.
Do Not Operate Unless In Contact With Ferrous Target
Specifications
Maximum Breakaway Force (Without Friction Pad)
Maximum Breakaway Force (With Friction Pad)
Maximum Shear Force (Without Friction Pad)
Maximum Shear Force (With Friction Pad)
Thickness for De-Stack
Maximum Allowable Pressure
On Target Actuation Pressure (Full Saturation)
Air Port Threads
Net Weight
Individual Magnetic Pole Footprint
Mounting Options
Material Thickness - mm (in)
1
Maximum Force
Without Friction Pad - Newton (N)
Maximum Force
1
With Friction Pad - Newton (N)
Required Air Pressure
3
Required Air Pressure
3
1
Determined in laboratory environment on 2" thick SAE1018 Steel with surface roughness 63 micro inches with optimized
pole shoes. Many factors contribute to the actual breakaway force and safe working load in each application. Consult a
Magswitch Applications Engineer and test the Magswitch in each application before deployment.
Tested and Determined with Two SAE1018 Steel Sheets L=200mm W=200mm Thickness=1.5 mm.
2
3
Values may vary by +/- 5%.
4
Maximum forces listed above are not safe lifting forces. Designer must take into account safety factor when specifying
tool. Magswitch recommends SWL = 5:1 for most applications.
1101721 r1
For more information, contact our Application Engineers at +1.303.468.0662 or via magswitch.com
WARNING!
1
1
1
2
Without Friction Pad - Bar (psi)
With Friction Pad - Bar (psi)
1
118 N
111 N
43 N
49 N
0.059 in
1.5 mm
145 psi
10.0 Bar
57 psi
3.9 Bar
2x G1/8 (1/8 BSP)
0.4 lb
0.2 kg
0.91" x 0.91"
23mm x 23mm
3x Side: Ø3-M4-Ø3-M4
1x Top (center): G1/8
1x Top: Ø3-M5-Ø3-M5
(0.020)
MAGSWITCH D12
+ 1(303) 468.0662
0.5
1.0
2.0
(0.039)
(0.079)
44
90
118
35
88
111
2.4
3.4
3.9
(35)
(50)
(57)
2.4
3.4
3.9
(50)
(57)
(35)
P/N: 81401541
magswitch.com
3.0
(0.118)
118
111
3.9
(57)
3.9
(57)
Page 1
Advertisement
Related Manuals for Magswitch D12
Summary of Contents for Magswitch D12
- Page 1 D12 | P/N: 81401541 The D12 is specifically designed for the delicate handling of small parts. Equipped with cutting-edge shallow field array technology, it excels as an exceptional solution for effortlessly de-stacking and lifting thin materials, a task that often proves challenging for conventional magnets.
- Page 2 D5/D12 Sensor Kit (sold separately) 88001580 D5/D12 28.5mm Ball Mount Kit (sold separately) 88001562 Note: Magswitch D12 (81401541) does NOT come with Sensor Kit (88001580). 88001584 is the bundle kit of D12 with Sensor Kit installed. 1101721 r1 Page 2...
- Page 3 Actuate to ON position while on target. o Insert Sick sensor (Magswitch PN 88001580 - sold separately) into T-slot and turn the sensor to parallel with T slot. o Push the sensor to the bottom of T slot and tighten screw to secure sensor.
-
Page 4: Wiring Diagrams
Dimensions in mm (inch) L=300m; Number of Cores = 4 ① Fixing screw SW 1.5 ② Display LED ③ Teach-in button ④ Display LED ⑤ Connection 1101721 r1 Page 4 For more information, contact our Application Engineers at +1.303.468.0662 or via magswitch.com... - Page 5 Press on the outside of Friction Pad along the lips several times until the lips are fully engaged into the slots. • The installation of Friction Pad is complete. 1101721 r1 Page 5 For more information, contact our Application Engineers at +1.303.468.0662 or via magswitch.com...