Power Up; Power Down - Roland DM-80 Owner's Manual

POWER UP
POWER DOWN
Interconnected computer devices need to be turned on and off in a
particular order. Please observe the following suggestions.
Before turning on the DM-80, be sure to confirm all DM BUSS, SCSI,
Audio and MIDI connections. Reduce the audio monitor level.
le Power on the terminated SCSI devices.
2. Post on the other, non-terminated SCSI devices. Wait for all drives to come up to
speed.
3* Power on the ОМ-80.
4* Power on the computer, if you are using Track Manager software.
5 • Power on any MIDI and SMPTE devices.
6* Finally, turn on any other audio equipment.
Before powering down the DM-80, be sure to save the current Project,
and reduce the audio monitor level.
le Execute the SHUT DOWN command from the Remote Unit or Track Manager. № will take about 30
seconds for all drives to stop spinning. Check that heads of all external drives have been parked
(in other words, not spinning) and eject any removable disks or tapes.
2* Power off audio devices.
3% Power off the DM-80
ROLAND DM-80-4 / DM-80-8 • OWNER'S MANUAL 17.