Advertisement
Leal
a Copying
Your Tapes (Dubbin
Connections you'll need to make.
e When connecting to a normal VCR, use the L Audio In jack for proper sound produi
Playing (Source) VCR
Recording (Editing) VCR
TV for Monitoring
1 inserta pre-recorded
To Monitor Dubbing on Your TV
*
Bo
tape into the Playing
VCR channel (CH3 or CH4).
2 Set the VCR/TV Selector on the Recording
2 Insert a blank tape with
VCR to "VCR."
record tab into the
Recording (Editing) VCR.
Selecting the Input Mode
3 Select "LINE" Input mode on the
Press INPUT.
Recording (Editing) VCR. (See "Selecting
The display will change in the order below.
=
the Input Mode" at right.)
— ,
Channel
———» LINE
e
(
Number
)
M
ot
<
4 Press PLAY on the Playing VCR.
or
O
Press PAUSE at the desired starting point.
Press CH A/V.
The display will change in the order below,
O
ge
a
ae
1— F 3
3
5 Press REC on the Recording VCR, and then
|
ABLE)
(TV)
0
press PAUSE immediately thereafter.
NE
125 or 69
e)
6 Press PAUSE on both VCRs at the same
time, to begin copying.
+ When LINE is selected, "L" is displayed in the Multi
To Edit Out Unwanted Parts
Function Display for about 4 seconds.
Press PAUSE on the recording VCR while copying is
in progress. Press PAUSE again to resume copying.
A
OA
A
A
+
Unauthorized exchanging and/or
T Press STOP on both VCRs to stop copying.
copying of copyrighted recordings
may be copyright infringement.
23
Advertisement
