MPS LUMI Series Product End-Of-Life Disassembly Instructions

Product End-of-Life Disassembly Instructions
Product Category: Notebook
Marketing Name / Model
[List multiple models if applicable.]
MPS LUMI Series
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of products to remove components and materials requiring selective treatment, as defined by EU

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.
1.3 The product includes large capacity storage devices,storage devices can be connectd by interface insertion way.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
Notes
With a surface greater than 10 sq cm
M/B, IO Board, Touchpad Module，Adapter board，LCD Tcon
board
lithium Battery
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
LCD
AC Power cord
Include the cartridges, print heads, tubes, vent
chambers, and service stations
Quantity
of items
included
in product
5
1
0
1
0
1
1
1
0
0
0
0
0
0
Page 1