Summary of Contents for Rack Solutions 122-2447
- Page 1 Patent(s) Pending 2U Sliding Rail Kit for HP Servers 4Post Page 2 2Post Center Page 4 Installation Instructions Kit P/N:122-2447, 122-7158...
-
Page 2: Kit Contents
Kit Contents Kit Contents: Rack Mount 8x: (2) Outer Rail (Left & Right) (8) 10-32 x .500 Pan Head Screw (2) Inner Rail (8) 12-24 x .500 Pan Head Screw (2) Rear Bracket (Left & Right) (8) 12-24 x Square Nut (8) 12-24 x Cage Nut Rear Bracket Hardware: (8) 8-32 x .312 Flat Head Screw... - Page 3 4Post Installation Instructions Step 3. Attach the rails to the rack: Attach the Front and Rear of the rails to the 4Post rack as shown below using supplied 8-32 Pan Head Screws on each side. Repeat for the other side. Right side shown, Left side parts are labeled "L". Tighten the front and rear Pan Head Screws on the right side rail.
- Page 4 2Post Center Installation Instructions Step 1. Rail Attachment: Attach the Inner Rail to the chassis by aligning the Shoulder Lugs with the keyholes in the Inner Rail and slide until the retaining clip has secured the Inner Rail to the server. Repeat for the other side. Inner Rail (Labeled "R") Step 2.
- Page 5 2Post Center Installation Instructions Step 4. Attach Retainer Bracket: Attach Retainer Bracket and Hook Plate to the front of the outer rail as shown below using the supplied 8-32 Pan Head Screws. Repeat for the other side. Latch Plate Outer Rail (Labeled "R") Retaining Plate (Labeled "R")
- Page 6 Page 6...
- Page 7 Page 7...
- Page 8 Warranty Statement Innovation First, Inc. warrants our products against defects in material and workmanship for a period of one (1) year from the date of purchase. Innovation First, Inc. liability shall be limited to repairing or replacing, at our option, any defective product.