Sony TC-FX4040 Service Manual page 3

TC-FX4040 |
SECTION
1
:
OUTLINE
1-1. FUNCTION OF CONTROLS
E) TAPE COUNTER
RESET
hp PEAK LEVEL METER
b
Rearieey,
:
Y
FULL LOGIC FEATHER TOUCH MECHANISM a
ee
a
EY SEIT SEG OIE,
yi HEADPHONES
wo
'
TC-FX4040
Each number in the text is keyed to that of the illustra-
tions on pages 3.
Front panel (Fig. [A])
@ POWER switch
@ Cassette holder
© TAPE COUNTER and RESET button
The tape counter provides a numerical reference point
while recording which can be used to index a recorded
cassette. To reset to zero, press the RESET button.
@ Function indicators
@ PEAK LEVEL METERs
These meters show the peak input level of each channel
during recording, and recorded levels in the playback
mode.
@ 4 (eject) button
Press this button to open the cassette holder.
@ HEADPHONES jack (stereo phone jack)
© <4 (rewind) key
Press this key to advance the tape rapidly to the left. It is
also used for the auto play and review function.
tions.
Op (playback) key
© gi (stop) key
Opp (fast-forward) key
Press this key to advance the tape rapidly to the right. It
is also used for the cue function.
tions.
® 11 (pause) key
® 0 (record muting) key
Press this key to eliminate unwanted material and to in-
sert a blank space during recording.
® @ (record) key
Press this key together with the & key to start recording.
® DOLBY NR* switch
@TAPE select buttons
@® MIC jacks (phone jack)
Any low-impedance microphone equipped with a phone
plug may be used.
Rear panel (Fig. [B])
@ LINE OUT (line output) jacks (phono jack)
@SYNC connector (3-pin)
@ CONTROL S IN connector
@ CONTROL S OUT connector
@ AC power cord