Advertisement
Quick Links
DEALER / INSTALLER
END USER
A-FRAME COUPLER WITH LOWER SUPPORT PLATE (SEE FIGURE 6)
MODELS APPLICABLE
MAXIMUM LIFT CAPACITY
RETRACTED HEIGHT
VERTICAL TRAVEL
POWER REQUIREMENTS
OUTER TUBE DIAMETER
POWER CORD LENGTH
FOOT PAD DIAMETER
LED WORK LIGHTS
SHIPPING WEIGHT
See www.huskytow.com for Warranty Information / Tech Support / Product Updates.
©2023 Keystone Automotive Operations Inc. All Rights Reserved. September 2023. REV1
BRUTE ELECTRIC TRAILER JACK
( HB3000, HB4500 & HB4500R )
WITH SMART STOP
Assembly, Installation, Operation, and Maintenance Instructions
Provide a copy of these instructions to the end user of this product. These instructions provide
important operating and safety information for proper usage of this product. Demonstrate the
proper use of the product with the end user. Have the end user demonstrate that they understand
the proper use of the product.
Read and follow all instructions included in this manual. Ask your Dealer/Installer for assistance if
you do not understand the proper use of the product. Never remove any decals from the product.
Failure to follow these instructions can result in injury or death.
TOOLS & COMPONENTS REQUIRED
THREE (3) GRADE 5, 1" LONG, 3/8"-16 UNC BOLTS (INCLUDED)
THREE (3) 3/8" FLAT WASHERS (INCLUDED)
THREE (3) 3/8" STAR WASHERS (INCLUDED)
9/16" WRENCH
TORQUE WRENCH
WIRE CUTTERS
WIRE STRIPPERS
CRIMPERS OR SOLDERING IRON
SPECIFICATIONS
HB3000; HB4500; HB4500R
3,000 LB / 4,500 LB (CONTINUOUS USE)
31-3/8"
18"
12 VOLT DC
2-1/4"
6 FT OF #10 GAUGE WIRE
5-1/2"
ON 3 SIDES FOR EASY NIGHTTIME HOOKUPS
HB3000 – 27-1/2 LB; HB4500 & HB4500R – 29 LB
PART
87247, 87248,
NUMBER
87641 & 88141
INSTALL
30 MINUTES
TIME
Page 1 of 7
Advertisement
Related Manuals for Husky HB3000
Summary of Contents for Husky HB3000
- Page 1 ON 3 SIDES FOR EASY NIGHTTIME HOOKUPS SHIPPING WEIGHT HB3000 – 27-1/2 LB; HB4500 & HB4500R – 29 LB See www.huskytow.com for Warranty Information / Tech Support / Product Updates. ©2023 Keystone Automotive Operations Inc. All Rights Reserved. September 2023. REV1...
-
Page 2: Installation
3. If replacing an old jack, remove the old jack from SWITCH the coupler. BRAKE RELEASE HANDLE 4. Insert the Husky Brute into the jack hole and align ® the bolt holes so the motor housing is facing forward as RUBBER ACCESS COVER FOR MANUAL BRAKE shown in (Figure 1). -
Page 3: Manual Operation
2. Remove the rubber access covers on the top of the on a loaded jack. Due to the Husky Brute’s ® jack and on the side of the motor cover. See (Figure 1). -
Page 4: Remote Control
REMOTE CONTROL ( ONLY INCLUDED WITH THE HB4500R ) Before using remote control, you must press the ON Indicator Light Figure 3 button, the LEDs will flash momentarily to confirm the remote is ON. DOWN Press the UP button to extend the jack (raise the trailer). Press the DOWN button to retract the jack (lower the OFF / LOCKED trailer). -
Page 5: Replacement Parts
30 AMP MANUAL RESET CIRCUIT BREAKER 87526 UNIVERSAL CONNECTOR STORAGE KIT 81497 MAINTENANCE Due to the design of the Husky Brute’s low-friction ® ball screw, the inner assembly of the jack does not require regular lubrication. But to keep your jack in good, functional condition, fully extend the jack and clean the inner jack tube once per year. - Page 6 ALTERNATIVE 7-WAY PLUG WIRING To wire the Husky Brute jack through a 7-way plug ® Figure 5 instead of wiring to the trailer battery. Black Terminal: 12V Battery Power / Auxiliary Power 1. Take the black wire from the jack and wire into the black terminal of the 7-way plug.
-
Page 7: Warranty Terms
Husky Towing Products and Keystone Automotive Operations Inc. with proof of purchase by the original purchaser. The original purchaser shall pay all transportation and shipping costs associated with the return of the defective product and the defective product shall become the property of Keystone Automotive Operations Inc.