Guarantee Regulations; Notes On Disposal - Profi-AirBrush ULTIMATE-1 Operating Instructions Manual

4 English
7. Important note: please pay attention before commissioning the airbrush compressor!
l Please, note that in dependence of the device used (compressor/gun) the color must be diluted.
l Your airbrush gun must be cleaned thoroughly after each color change, otherwise the residual color mixes with the
newly filled color.
Moreover, the very fine nozzle will be clogged by dried ink. The gun should be cleaned with thinner and water.
Especially the nozzles, which are subject to wear, will have longer lifetime by careful cleaning .
l Please, inform yourself in the literature or on the Internet about the working methods and techniques before
starting work .
l Please, check the funktion of the gun with clean water. Is the function correctly given, the technology of the gun
is perfect.
l Please connect compressor, hose and gun always tight. Avoid oscillatingly opening (constant on and off) of the
compressor in order to reduce wear and to save energy.
l We sell only tested products. These are strictly for personal use.
l Claims for damages for improper disassembly and cleaning can not be accepted.
l Complaints about contaminated airbrush guns with paint,residues, could not be recognized .

8. GUARANTEE REGULATIONS

For all manufacturer defects and material defects we grant the legal guarantee time (new and unused product). In
such cases we take over the exchange or the repair of the device. Forwarding expenses are not carried by us.
The guarantee is not valid with:
l Material wear (sealing rings, impeller wheels, impeller chambers)
l Unjustified interventions or changes in the device
l Damages by selffault
l Improper servicing and improper use
Moreover, we give no damage compensation for secondary damages!

9. NOTES ON DISPOSAL

Electrodevices of our company, labeled with the symbol of the crossed trash bin, are not permitted to
be disposed in your household garbage.
We are registered at the German registration department EAR under the WEEE-No. DE79535656.
This symbol means, that you're not allowed to treat this product as a regular household waste item – it
has to be disposed at a recycling collection point of electrical devices.
This is the best way to save and protect our earth.
THANKS FOR YOUR SUPPORT!
10. EU DECLARATION OF CONFORMITY
The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the products named overleaf,
namely Ultimate-1, Universal II, Universal II-C, DUO-Power II, DUO-Power II-C, Compact II, Compact Mobil,
DUO-Power Efficient as placed on the market, comply with the relevant provisions listed below, the relevant EU har-
monised directives and the EU standard for safety. This declaration of conformity applies insofar as no modifications
are made to the product. The sole responsibility for issuing this declaration of conformity lies with the manufacturer.
The sole authorised person to keep the technical documents:
Amur S.à r.l. - 36, Rue de la Gare - L-5540 Remich
Machinery Directive (2014/30/EC)
The following harmonized standards:
EN-55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
RoHS Directive
2011/65/EC
Signed for and on behalf of:
Amur S.à r.l.
Remich, 02.02.2023
i.V. Dipl. Phys. Peter Neumüller
Technical Manager