Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EVOLT Manuals
  4. Outdoor Cart
  5. EG 2000
  6. Owner's manual

EVOLT EG 2000 Owner's Manual

2000w max power electric go-kart
Hide thumbs

Advertisement

Quick Links

Download this manual
EG 2000
2000W MAX POWER
ELECTRIC GO-KART
www.evoltadventure.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the EG 2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for EVOLT EG 2000

  • Page 1 EG 2000 2000W MAX POWER ELECTRIC GO-KART www.evoltadventure.com...
  • Page 2 Congratulations on your purchase of this Electric Go Kart. This owners/operators’ manual will provide you information regarding safe operation, operational instructions, maintenance and care. Fully understanding this manual and following all of the instructions herein will provide the knowledge needed to have safe and enjoyable Go Kart operation.
  • Page 3 The third part will describe HOW TO AVOID THE HAZARD. EVOLT is concerned about the environment and believes in conserving and protecting all-natural resources. For this reason, owners should recycle, trade in, or dispose as appropriate, oil and tires.

  • Page 4: Important Labels

    IMPORTANT LABELS...
  • Page 6 1. Always read and understand the 11. Never operate Go Kart with owner’s/operator’s manual and long hair, loose jewelry or loose warnings before starting clothing that could get caught in the Go Kart for the first time moving parts. 2. This Go Kart should only be 12.
  • Page 8 Main Switch (1): When the main switch is placed in the (ON) position the motor can runs. Please keep the main switch in the (OFF) position when you leave the vehicle, park or stop. Gear Switch (2): when the Gear switch is place in the (High) position the vehicle can reach the top speed.
  • Page 9 Charging port (1): To connect the power plug from the controller or charge plug. Battery Charger (2) Input: AC100-240AC~50/60Hz Max: 2.5A Output: DC60V-3.0A Warning: the Charger is for indoor use only. Risk electric shock please do not open the charger.
  • Page 10 Seat adjustment (1)) The seat latch is located under the driver side seat. To access, look under the front of the driver side seat.Pull the seat latch down to move the seat forward or backward. Before operating the Go Kart make sure the seats are bolted in properly and that the seat latch is locked in place in desired position.
  • Page 11 Inspecting and checking the condition of the Go Kart before each WHAT TO ride is important. Following the CHECK FOR CHECK pre-ride check list will help insure the you do not have mechanical Steering • Smoothness problems which could result in •...
  • Page 13 Always wear a DOT certified helmet (1). A helmet helps protect against serious head injuries in the event of an accident. A helmet is the most important safety gear item you can wear. Consult with a motorcycle dealer for the correct size and type of helmet that is right for you.
  • Page 14 Never start the go kart without the operator and passenger wearing the seat belt harness in the appropriate manner. To connect the seat belt harness properly sit in the seat and place arms through the shoulder straps( )on the corresponding side of the harness.
  • Page 15 Place the Main switch , located on the Steering column, in the “ON” position . Place the Forward or Reverse Switch in the “Forward” position.
  • Page 16 Sit down in the go-kart and fasten seat belt. If riding with a passenger, make sure passenger has seat belt fastened also. If there is no passenger,make sure passenger seat belt is buckled and secured. A loose passenger seat belt could get tangled in moving parts.
  • Page 17 1. stop and evaluate the hill before To operate the Go Kart going down a attempting to climb. Make sure the hill, follow the instructions below. hill is not too steep, the terrain is 1. stop and evaluate the hill before not loose or slippery and that there attempting to descend.
  • Page 18 In certain situations you may experience skidding or sliding even though the brakes are notapplied. Follow the operating techniques listed below to regain control. Front wheel begins to slide or skid: To regain traction, let off the throttle, do not apply thebrakes. Rear wheels begin to slide or skid: To regain traction, let off the throttle and brakes until control of...
  • Page 19 operating through water can be hazardous, especially if it is fast moving. Make sure the water you are operating through is shallow and is not more than 5cm (2in) deep. Before crossing any water look at the terrain entering and exiting the water, the terrain should have a gradual slope with no obstacles.
  • Page 20 Preventive maintenance in cold weather operating is important. After operating in cold weather with snow, slush, water or ice, dry off the Go Kart including brake and throttle Brake and throttle linkages: linkages. Apply the brakes several Cold weather requires additional times making sure that the pre-ride inspection of the Go Kart friction has dried off the brake pads...
  • Page 21 After market parts and accessories Load guidelines including are available from many accessories: manufactures. EVOLT cannot confirm Never exceed the maximum load the quality, safety or suitability of all capability of the Go Kart. This the accessories available. when includes the weight of the operator purchasing an accessory, use caution, and any cargo.
  • Page 22 For maintenance, your Go Kart maybe maintained by an authorized EVOLT service center or a repair shop of your choosing. Following the proper maintenance procedures and time table for maintenance listed in this manual is important for the safety of the operator and the life span of the Go Kart.
  • Page 23 fluid spect brake fluid level before each ride, if low, check brake pads for wear and brake lines and components for leaks. Replace brake fluid every 2 years. rvice center of the owner’s...
  • Page 24 This Go Kart is equipped with rear hydraulic disk brakes Check the brake fluid level( ) for rear brakes. If fluid level is below the lower mark, inspect the brake hoses( ) for leaks or cracks. If there are no leaks, inspect the brake pads for excessive wear.
  • Page 25 spect tires before each ride,this should include the following: spect for cracks or leaks spect tread depth. tread depth is below 4mm 16 in replace the Minimum tread tire. .16 in . Check tire pressure. Incorrect tire pressure can affect the handling, operator,comfort, steering, tire life and traction.
  • Page 26 If the Go-Kart is left unused for an extended period of time proper storage Wash Go-Kart thoroughly. Note: Keep water away from battery maintenance is required. and motor controller while Wash Go-Kart thoroughly, then wax painted parts with a non abrasive auto wax. Coat vinyl seat and rubber parts with a vinyl/ rubber protectant.
  • Page 27 Trouble Possible cause Solution 1, the battery connect cable is bad 1, re-connected securely connect 2, find the short route 2,After the short-circuit cable 3,battery terminal board contact . Check the battery is not good After power on recharge, or whether but vehicle 4, the battery voltage is too low, failure...
  • Page 29 60 3...

  • Page 30: Vehicle Identification Number

    The Vehicle identification number is needed when calling for parts, service center help or when registering your Go Kart. Locate the number and list the number below for your reference. The 17 digit Vehicle Identification Number (VIN) is stamped on the right side of the go-kart on the metal frame.
  • Page 31 EG200...
  • Page 34 Spring lock washer Flange lock nut Spring lock washer 1 Locking nuts 2 FRONT 14 Spring lock washer 14 Flange 2. 14 Spring lock washer(1) 3. 14 Flange nuts(2)
  • Page 35 8 35 8 Cap with Steering column Flange 1. To install the seat, attach the bolt, located on the bottom of the seat, to the bracket on the Go Kart bolt before tighten the M8 nuts(1).
  • Page 36 10×1.25 Flange nuts M10×25×1.25 Bolts 10 Washer .(3) M10×25×1.25 B s(2) M10 and M10×1.25 Flange s(1)
  • Page 37 ap Nut Large washer M8 Concave Washers A 4 ea. (5) M8 Concave Washers B 10 ea. (6) with M8x35 bolts(2) and M8 nuts (3). Note: Do not tighten bolts at this time, keep bolts loose until the brush guard is completely M8x40 bolts and M8 cap nuts assembled.
  • Page 39 CONNECT WIRE Open the rubber cover and find the wire connecting 50A fuse 2.Open the lid of fuse and put add-in card in. 3.Close the lid and put down the battery cover.
  • Page 40 Inspecting and checking the condition of the Go Kart before each WHAT TO ride is important. Following the CHECK FOR CHECK pre-ride check list will help insure the you do not have mechanical Steering • Smoothness problems which could result in •...
  • Page 41 Version: 10012201...