Advertisement
Control Locators
Unit Controls
1 Adapter for 45 RPM records
2 AC Power Cord
3 Turntable Suspension Screw
4 Cue Lever
5 Arm Rest
6 Hold Down Clip
7 Speed Control Switch
8 Tone Arm
9 Red Power Light
10 Tone Control
11 Volume On/Off Switch
12 Turntable
13 Spindle
4
1
2
3
4
5
7
8
13
12
11
10
9
Unpacking the Turntable
1
Carefully remove the packing materials and the
protective plastic bag from the unit.
2
Open lid and remove black tie-wrap by
untwisting and gently sliding out from under
tone arm.
3
Remove cardboard shipper.
6
4
Remove white protective needle cover by gently
pulling towards front of unit.
5
Using you fingers, turn the Turntable
Suspension Screw clockwise until it is all the
way down. This allows the turntable to float on
its shock absorbers.
6
Release tone arm hold down clip by gently
pushing to the right. This will unlock tone arm
from its arm rest. Re-lock the hold down clip
when moving the unit to another location.
Getting Started
Power Source
1
Unwind the AC POWER CORD (35) at the back
of the unit and connect it to a power outlet.
2
Plug A/C cord into appropriate outlet.
AC
Polarized Plug
3
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
5
Advertisement
