Page 1
Mount on an Omegon Pro 40mm carbon tripod (product no. Mount on an Omegon stainless steel tripod in black 60250, not included) (item no. 70719) and an Omegon Pro half pier (product no. 72302), combination available as a set under product no. 75464 English Version 8.2023 Rev.
Page 2
Omegon® Pro Kolossus mount The Omegon Kolossus is a parallelogram mount for large binoculars. When using it to observe stars, it feels almost as if your binoculars are weightless and floating in the air. This is achieved with a three-part swivel arm, 360-degree rotation, and a mechanism that allows you to perfectly balance your binoculars.
Page 3
Now screw your tripod head plate to the horizontal pivot joint underneath. Then you are ready to put the Kolossus mount together with its tripod plate onto your tripod. If you are using the half-pier, first screw this onto the tripod. The Kolossus mount fits directly into the upper side of the half-pier.
Page 4
1.2.3 Binoculars weighing more than 5kg: You will need an additional counterweight if your binoculars weighs more than 5kg. A single Omegon Pro Kolossus counterweight is available under product no. 75223. 2. Practical tips The L-bracket can be moved around two axes without affecting the parallelogram arm. We therefore recommend the...
Need help?
Do you have a question about the Pro Kolossus and is the answer not in the manual?
Questions and answers