WT sensor PCMPT01 Series Quick Start Manual

PCMPT01&PCMPT02&PCMPT03 Series
Economical Melt Pressure Transmitter
Features
■ Signal output:4～20mA,0～10V,0～5V
■ Accuracy grade:±1.0%F.S
■ Special diaphragm coating
■ IP65 ingress protection
■ 80% internal calibration
Applications
■ Injection molding industry
■ Chemical fiber industry
Notes:
1 Do not touch the diaphragm with hard
objects, which may cause damage to the
diaphragm.
2 Please read the Instruction Manual of the
product carefully before installation and
check the relevant information of the product.
3 Strictly follow the wiring method for wiring,
otherwise it may cause product damage or
other potential faults.
4 Misuse of the product may cause danger or
personal injury.
Performance parameters
Input Voltage
Output
Accuracy Grade
Pressure Range
Pressure Unit
Overload Capacity
Zero Temp Drift
April 2023
Product overview
PCMPT01&PCMPT02&PCMPT03 series
pressure transmitter series is specially designed for pressure
measurement at high temperature in the injection molding
industry, special diaphragm and highly anti-abrasive coating of
which enable it to work normally at high temperature up to
320℃.This series is installed in the manner of standard
threaded connection and has many advantages like high
stability and long service life.
Notes:
1 Do not misuse documentation.
2 The information presented in this product sheet is for reference only.
Do not use this document as a product installation guide.
3 Complete installation, operation, and maintenance information is
provided in the instructions of the product.
4 Misuse of the product may cause danger or personal injury.
24VDC(12～36VDC)
4～20mA,0～10V,0～5V
±1.0%F.S
Refer to below pressure range form
MPa (default), psi, bar
1.5 times rated pressure
0.005MPa/℃
1
economical melt
www.wtsensor.com