Element One CONMIC FLAP Installation And Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Installation and Operating Instructions (EN)

CONMIC FLAP

CONMIC FLAP Extended

Table of Contents

Need help?

Do you have a question about the CONMIC FLAP and is the answer not in the manual?

Questions and answers

Summary of Contents for Element One CONMIC FLAP

Page 1 Installation and Operating Instructions (EN) CONMIC FLAP CONMIC FLAP Extended...
Page 2 Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Explanation of symbols Important Note Caution © ELEMENT ONE Multimedia GmbH...
Page 3 Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Dear Customer, thank you very much for purchasing our product. Please read this installation and operating instructions carefully and keep them in a safe place. In this manual we have endeavored to...
Page 4: Table Of Contents
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Table of Contents Table of Contents ................................. 2 Commissioning Date ..............................3 Notes ..................................3 Description ................................... 5 Features ..................................5 Dimensions ................................... 6 Safety Instructions ............................... 7 Installation ................................... 8 Commissioning ................................
Page 5: Commissioning Date
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Commissioning Date Date: Serial No.: Keep this document for future reference. Pass on this document when you pass on the device. Notes © ELEMENT ONE Multimedia GmbH...
Page 6 Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Scope of Supply  CONMIC FLAP | CONMIC FLAP Extended  Table Power Supply - Input: 100-240V AC, 50 / 60Hz. 1.5A; Output: 12V 60W  MAX 5.A (Cable Length DC ~ 140cm) ...
Page 7: Description
The sturdy frame and high-quality mechanical elements ensure smooth running without jerks or vibrations. To prevent personal injury and damage, CONMIC FLAP has been equipped with a safety control system. If counterforces of 20 N or more occur during extension or retraction, an acoustic signal sounds and the process is interrupted, and a countermovement is initiated for approx.
Page 8: Dimensions
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Dimensions © ELEMENT ONE Multimedia GmbH...
Page 9: Safety Instructions
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Safety Instructions = Important Note = Caution = Ban The device may only be opened by authorized personnel when it is disconnected from the power supply! Let damage and defects be repaired immediately by authorized specialists.
Page 10: Installation
ELEMENT ONE units are held in the furniture by means of the decorative/holding frame. The optionally supplied clamping holders to be attached at the side are intended for horizontal alignment and fastening in the furniture.
Page 11 Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Please open the carton at the marked top and CAREFULLY place it horizontally on the floor or a clean, flat surface. Please remove the device from the packaging by first removing the two foam...
Page 12: Commissioning
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Commissioning = Impotant Note = Caution = Ban General Information No PoE The network used for IP-based control of the monitors must not support the PoE (Power- over-Ethernet) function! Switch-on delay A LAN-capable system is only ready for operation with a delay of approx.
Page 13: Conmic Flap | Conmic Flap Extended
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Ensure that the cables are not pinched during insertion. Ensure that all screw connections are secure. Electrical connections should only be carried out when the device is disconnected from the power supply.
Page 14 Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) AC 100-240Volt Version XLR-5-Pin: XLR-5-Pin 1 = yellow 2 = white 3 = brown 4 = green 5 = grey Microphone Button (a) LED minus (AC/DC 12V, external power) =...
Page 15: Operation
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Operation General Information Make sure that no body parts and/or objects are between the frame, microphone carrier and other mechanical components. Do not reach into the device if you discover objects between the frame and microphone...
Page 16: Microphone Operation
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Microphone operation Microphone on/off Control (optional) Retracting Press the B button and the microphone will retract automatically. By briefly pressing the A button, the extension can be interrupted in any position.
Page 17: Service Function Direct Axle Access (Daa)
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Service function DIRECT AXLE ACCESS (DAA) CONMIC FLAP is equipped with DIRECT AXLE ACCESS (DAA), a useful feature for installation and maintenance. This allows you to extend and retract the microphone manually, i.e. without a power supply.
Page 18: Care Instructions
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Care Instructions = Important Information = Caution = Ban Disconnect the power supply plug before cleaning work! To clean the device, use only cloths moistened with water or detergent.
Page 19: Tcp/Ip - Control And Status Request
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) TCP/IP - Control and Status request Every CONMIC FLAP is equipped with a Cat-5 LAN cable socket as a network interface. Via this interface, the device can be operated IP-based with control commands (e.g. via a media control system or via a smartphone app).
Page 20: Control Via A Media Control System With 9-Pin D-Sub Remote Interface
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Control via a Media Control System with 9-pin d-sub Remote Interface Do not apply external voltage! Pins may not be bridged! Current pulse for switching = approx. 15 mA at 12 V DC...
Page 21: Technical Specification
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Technical Specification CONMIC FLAP CONMIC FLAP Extended Vertically retractable microphone lift for flush Vertically retractable microphone lift for flush mounting in tables. Electromotive mechanism for mounting in tables. Electromotive mechanism for...
Page 22: Safety Standards
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Safety Standards VESA: DPMS DDC2B-Standard (Version 2 Level B) For optional accessories, observe the instructions enclosed with them! Declaration of Conformity We declare under our sole responsibility that devices of the series...
Page 23: Warranty
Installation and Operating Instructions CONMIC FLAP / CONMIC FLAP Extended (EN) Warranty (1) The warranty for ELEMENT ONE products is as follows from the date of purchase - 60 months on all purely mechanical components, and - 24 months on all electrical and electronic components.
Page 24 WEEE-Rg.Nr.: DE69117530 ELEMENT ONE Multimedia GmbH Zum Murgdamm 5 DE-76456 Kuppenheim Service-Hotline: +49 (0)7222 96654-15 service@element-one.de STAND: 06/2023 Misprints, errors and technical changes reserved © ELEMENT ONE Multimedia GmbH...

This manual is also suitable for:

Conmic flap extended