Table of Contents
Advertisement
RADIO
1) Press the Power Switch to "m= ON".
The
Power/Battery Check Indicator will light.
2). Press the RADIO
Button (FUNCTION).
7) The radio can be turned off by setting the Power Switch
to 'MH OFF/SLEEP".
Notes:
eTo receive FM stereo broadcasts, set the FM Mode
Selector to 'EE STEREO". The FM Stereo Indicator
will light during stereo broadcasts.
elf FM stereo reception is poor (excessive noise, FM
Stereo Indicator flickers), set the FM Mode Selector
elf the tape operation buttons are pressed while you
are listening to a radio broadcast, the sound and
Line Output may be temporarily interrupted.
m@ FM AFC
This set uses an Automatic Frequency Control (AFC) circuit
which locks the tuned station during FM and FM stereo
reception. This assures additional stability without frequen-
cy drift.
MLevel Meter
@ Antennas
FM:
@Pull out the Telescopic Antenna and adjust its length and
angle for optimum reception.
On,
AM:
eThe
sensitive
ferrite core
antenna
inside the set will
provide excellent AM reception in most areas. For opti-
mum reception, turn the set in the direction which gives the
best results, since the ferrite core antenna is directional.
3000 twin lead
;
Matching
transformer
(300Q—75Q)
Shield wire
75Q coaxial cable
Inner conductor
Note:
If the antenna is connected with 75Q coaxial cable instead
of 3009 twin lead, the matching transformer is not required.
2 Paes
Push and
ib
Insert wire
8
Insert wire
or
Advertisement
Table of Contents
