Led Indicator Lights On The Rear Of Subwoofer - Samsung HW-Q900T Full Manual

4. Check if the LINK LED is solid blue (connection complete).

LED Indicator Lights on the Rear of Subwoofer

LED
Blue
Red
Red and blue
NOTES
• If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the
STANDBY LED on the rear of the sub-woofer will turn red after blinking in blue several times.
Blue is On
Status Description
Successfully connected
On
(normal operation)
Recovering the
Blinking
connection
Standby (with the
Soundbar main unit
turned off)
On
Connection failed
Blinking Malfunction
ENG - 17
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Subwoofer.
-
Check if the power cable attached
to the main Soundbar unit is
connected properly or wait about
5 minutes. If blinking persists, try
manually connecting the
subwoofer. See page 16.
Check if the power cable attached
to the main Soundbar unit is
connected properly.
Connect again. See the
instructions for manual
connection on page 16.
See the contact information for
the Samsung Service Centre in
this manual.
Resolution