The Visioneer Strobe Xp 450 Scanner - Visioneer Strobe XP 450 Installation Manual

2 V S
ISIONEER TROBE
T V S
HE ISIONEER
ADF cover release
Paper guide—Holds documents in place. Adjusts to fit the document size.
Scanner button—Starts scanning using the scan settings button.
Status light—Shows the scanner's status. A flashing green light indicates the scanner is
preparing to scan. A steady green light indicates the scanner is ready to scan. Refer to the
Troubleshooting section for additional details.
Output tray—Holds documents after scanning through the ADF.
Output tray extension—Unfolded when scanning legal-sized documents.
ADF cover release—Opens the cover on the automatic document feeder.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
Power jack—Connects the power cord to the scanner.
Power switch—Turns the scanner's power on and off.
XP 450 S I
CANNER NSTALLATION
XP 450 S
TROBE
G
UIDE
CANNER
Paper guide
Scanner button
Status light
Output tray
Output tray extension
Power switch
Power jack
USB port