Visioneer OneTouch 8100 Installation Manual page 7

T V O T 8100 S 3
HE ISIONEER NE OUCH CANNER
Document cover. Close the document cover after placing items on the scanner glass.
Document pad. Helps to secure the document in place on the scanner glass.
Glass. Place items face down on top of the glass in the upper left corner.
Reference frame. Place items face down within this frame. Markings on the border of the frame
show where to align various paper sizes.
OneTouch buttons panel. Press a OneTouch button to scan, copy/print, email, or scan with
custom settings.
On/Off light. Shows that the scanner is receiving power.
On/Off switch. Turns the scanner's power on and off.
Power jack. Plug the scanner power cord into this jack.
ADF/TPA port. A port for an optional Auto Document Feeder (ADF) and a Transparency
Adapter (TPA) for scanning transparencies. Please visit our web site at www.visioneer.com for
more information about acquiring these optional devices.
Host Parallel port. If you're connecting the scanner to the computer's parallel port, plug one
end of the parallel cable into this port. Plug the other end of the parallel cable into the
computer's parallel port. Do not use this port when connecting with the USB cable.
USB port. A sliding latch covers and protects the USB port. Slide the latch to the side to see the
USB port. Plug one end of the USB cable into this port; plug the other end into a USB port on
the computer or keyboard. Do not use this port when connecting with a parallel cable.
Printer Parallel port. Use this port only if you connect a printer directly to your computer.
Unplug the printer from the computer and plug it into this parallel port on the scanner.