Udp Listeners - GatesAir Intraplex NetXpress LX Installation And Operation Manual

NetXpress LX & CM-30R Installation & Operation Manual 4 – Configuration & Operation
Version 1.1
SNMP Event Hosts
Host 1 IP address: The IP address of the event host 1, usually the computer running the primary
network manager application. If the address is 0.0.0.0, this entry is not active.
Host 1 Community name: The community name given to the SNMP trap. The community name
identifies a collection of SNMP managers and agents.
Host 2 IP address: The IP address of the event host 2. If the address is 0.0.0.0, this entry is not
active.
Host 2 Community name: The community name of the SNMP trap. The community name identifies a
collection of SNMP managers and agents.
Reset: Click this button to reverse all changes to this page.
Save: Click this button to record and apply configuration entries on this page.
4.3.4.5 UDP Listeners Table
UDP (User Datagram Protocol) is the IP standard protocol that allows an application program on one
machine to send a datagram to an application program on another machine. To access the UDP
Listener Table (Figure 4-44), point to Networking and click UDP.
Figure 4-44. UDP Listeners Table
Refresh: Click M to refresh the browser manually, or click 5s, 10s, or 30s to automatically refresh
the browser at 5, 10, or 30 second intervals.
Local IP Address: The local IP address for the UDP listener.
Local UDP Port Number: The port number assigned to the UDP IP address.
UDP port for voice signaling: The user-selected UDP port number for signaling. Default is 49155.
Submit: Click this button to save and apply all changes to this page.
4-50 GatesAir, Inc.
Intraplex Products