HP 82479A Owner's Manual page 169

Start time: HH: FM: 5s
start time ENDLINE
End dated YoMRSO0
end date ENDLINE
End timed HHIMM:SS
end time ENDLINE
Work img. .
Dore
The TRANSFER Program
The program asks for the starting time in the first day of
the time period.
Enter the starting time in HH: [MM: 55 form (24hr clock)
and press ENDLINE | .
The program asks for the ending date of the time period.
Enter the ending date in "7-0form and press
ENDLINE J
The program asks for the ending time in the last day of
the time period.
Enter the ending time in HH: MIM: 5% form (24hr clock),
and press ENDLINE | .
The program displays a status message while the data file
1s read and data is transferred.
Note that if the data is being transferred in one
reading/vector order, TFEHMZFEF must first scan the
entire file before actually transferring any data.
Depending on file size, this can result in a significant delay
before data transfer actually begins.
When all the scans in the data file have been processed,
the program ends.
When the program ends, an ending command is sent to the HP 444 56 package, which causes that program
to terminate.
12-5