Model £Y68i2
Ref. No. 3A
i
Procedure lA
2A -» 3A
Assembly of the mechanism block.
Motor
Piston and
Output shaft
hammer block
block
Pinion
Universal coupling
1. Set the bearing of intermediate shaft block
in the hole of motor block with adjusting the
cogs between motor pinion and bearing.
2. Insert the reciprocation bearing shaft into
the hole of universal cot^ling.
Make sure two thrust plates should be set
both side of reciprocation bearing shaft
one of each.
3. Assemble intermediate shaft block, piston
with hammer block and output shaft block
on the housing.
Reciprocation bearing
Intermediate shaft block
Bearing
Clutch gear
Universal coupling
Thrust plate
Reciprocation bearing
- 5 -