Jabra Halo Smart Instructions

Hide thumbs Also See for Halo Smart:

How do I pair my Jabra Halo Smart with my mobile device?

To pair your Jabra Halo Smart with your smartphone, tablet, or other

mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn off your Jabra Halo Smart by pressing and holding the Multi-

function button until the LED flashes red.

3. To enter pairing mode, press and hold (7 seconds) the Multi-function

button until the LED flashes blue (minimum of 4 flashes).

Pairing mode is announced in the earbuds and the LED continues to

flash blue.

4. To pair, go to the Bluetooth menu on your mobile device and select

the Jabra Halo Smart from the list.

https://www.jabra.ie/supportpages/jabra-halo-smart/100-98300000-

60/faq/94c751f4-38e5-40c6-a334-57781241bde8

30/01/2024 04:17

Page 1 of 2

Table of Contents

Need help?

Do you have a question about the Halo Smart and is the answer not in the manual?

Page 1 1. Turn on the Bluetooth setting on your mobile device. 2. Turn off your Jabra Halo Smart by pressing and holding the Multi- function button until the LED flashes red. 3. To enter pairing mode, press and hold (7 seconds) the Multi-function button until the LED flashes blue (minimum of 4 flashes).
Page 2 If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, here. Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device. https://www.jabra.ie/supportpages/jabra-halo-smart/100-98300000- Page 2 of 2 60/faq/94c751f4-38e5-40c6-a334-57781241bde8...