Summary of Contents for Liberty IPEX6000TC-C
- Page 1 IPEX6000TC-C, IPEX6001, & IPEX6002 Install Guide, Device Manual, and Specifications Rev 200311 11675 Ridgeline Dr. Toll-Free: 800-530-8998 Colorado Springs, CO 80921 Fax: 719-260-0075 supportlibav@libav.com...
-
Page 2: Product Features
Ethernet cable. The IPEX6000TC-C can be used in a point to point installation or in a matrix configuration that supports routing of one to one and one to many including multi-view for single display outputs and video wall configurations up to an 8x5 (Rows x Columns). - Page 3 Product Features IPEX6001 / 6002 Encoder / Decoder IPEX6001 / 6002 encoders and decoders provide the economical, flexible and powerful solution at resolutions up to 4096x2160@60Hz, 3840x2160@60Hz (4:4:4) and 3840x2160@60Hz (4:2:0 10-bit HDR). They allow uncompressed UHD media to be switched and distributed over standard 10GbE Ethernet networks with zero frame latency.
-
Page 4: Front And Rear Panels
IPEX6000TC-C Install Guide Front and Rear Panels IPEX6000TC-C Front Panel Status / Diagnostic LEDs • POWER: • ON; device is on • OFF; device is off • STATUS: • ON; device has entered HDMI config mode • BLINKING; The device is working in default mode •... - Page 5 IPEX6000TC-C Install Guide IPEX6000TC-C Rear Panel 12V DC power input IR receiver input IR emitter output HDMI input HDMI output RS232 / serial connection 10GBaseT AV Network connection with PoE support Analog audio input/output 10/100/1000BaseT LAN connection Factory RESET button •...
- Page 6 Front and Rear Panels IPEX6001 Front Panel...
- Page 7 Front and Rear Panels IPEX6001 Rear Panel...
- Page 8 Front and Rear Panels IPEX6002 Front Panel...
- Page 9 Front and Rear Panels IPEX6002 Rear Panel...
-
Page 10: System Installation Instructions
Liberty has documented several network switch settings for many common switch manufacturers, see documents related to this product on the product page of the Liberty AV website (www.libav.com). Connect Category 6A from the network switch to the appropriate transceivers 10GbE LAN port. - Page 11 IPEX6000TC-C Install Guide Connecting HDMI Devices Use only high quality High Speed HDMI cables rated for 18Gbps, do not exceed HDMI cable lengths over 5m/15’ for transceiver HDMI connections to AV sources and displays. Connecting Audio Devices The 3.5mm analog audio I/O connection can be configured as an input or an output and is configured in the Arranger server.
- Page 12 IPEX6000TC-C Install Guide Device / System Control Arranger is an AVoIP server application that will configure and manage the 6000 series on an AV IP Network. Arranger is licensed per endpoint for one AV Network and a license unlock code should have been provided upon purchase of the Arranger DigiIP 6000 series license.
-
Page 13: Application Diagrams
IPEX6000TC-C Install Guide Application Diagrams Note: Transceiver modes as notated (encoder, decoder or both) can be configured by the Arranger server Point to Point AV Extender Note: Both transceivers must be connected to local power AC outlet with the supplied DC power supplies, the point to point application does not support PoE. - Page 14 IPEX6000TC-C Install Guide A/V Network Multi-view and Video Wall A/V Network Transceiver Mode...
- Page 15 IPEX6000TC-C Technical Specifications Input/Output Connections HDMI Input One (1) HDMI Type A Receptacle HDMI Output One (1) HDMI Type A Receptacle 10GbE: One (1) 8P8C port (Shielded RJ45) LAN: One (1) 8P8C port (Shielded RJ45) Power One (1) 5.5 mm OD, 2.1 mm ID Threaded Barrel...
- Page 16 IPEX6001 / 6002 Technical Specifications...
- Page 17 IPEX6001 / 6002 Technical Specifications...
- Page 18 Thank you for your purchase. For Technical Support please call our toll free number at 800-530-8998 or email us at supportlibav@libav.com www.libav.com 11675 Ridgeline Drive Colorado Springs, Colorado 80921 USA Phone: 719-260-0061 Fax: 719-260-0075 Toll-Free: 800-530-8998...
Need help?
Do you have a question about the IPEX6000TC-C and is the answer not in the manual?
Questions and answers