Contents Precaution Quick Start Overview Compositions Accessories Charging the battery Writing stand Operation...
Page 3
Power Button Beep Type Magnification Color Mode Brightness Lighting Freeze Memory Auto power saving Restore...
Page 4
Hardware Reset Troubleshooting The unit does not turn on Black screen or White screen The image does not change Smudges or blemishes on the screen Specifications...
Precaution Before using CLOVER 3 for the first time, you must charge its battery. Refer to Charging the battery section for more details. Always operate the unit in a place where the temperature is between 10° and 35° C(50° and...
Page 6
Keep the unit away from wet areas, rain, and other sources of liquids. Do not submerge the unit Do not attempt to repair the unit. Any unauthorized attempt will void the product warranty. Contact your distributor to service. Use the supplied power adapter.
Quick Start Overview Thank you for purchasing CLOVER 3. CLOVER 3 is a pocket video magnifier with a 3.5 inch LCD display, providing sharp, clear images that are easily viewed in various magnification level and color mode. The unit allows you to put the magnifier on or close to...
Page 8
for further viewing. It also has an integrated fold-away writing stand. This unit is ideal for viewing labels, books, newspapers and more.
Charging the battery 1. Connect the supplied USB cable to the power adapter 2. Connect the supplied USB cable to the micro USB port on the unit 3. Plug the power adapter into an AC outlet and start charging...
Page 14
The status of Power LED indicator Charging when the unit is off, the power LED will be green, and then auto turn off when fully charged. A fully Charging will take about 3 hours, and will support the unit about 3 hours of continuous working ...
Page 15
When the unit is on and the power adaptor is not connected, the power LED will be green when the battery is high and will be red when the battery is low. When the red light starts to flash, you will need to charge the battery ...
Operation Power Button Press and hold the Power button for 3 seconds to turn on the unit when it is off Press and hold the Power button for 3 seconds to turn off the unit when it is on...
Page 18
Press the Power button to check the current status of battery capacity, color mode, freeze mode , and beep Press other button when holding the power button will make combo function, refer to the following instructions for more details...
Beep Type Unit on/off beep Button beep Threshold beep Low battery beep Beep Control: Press and hold the Freeze button for 3 seconds to turn on/off the beep...
Magnification Slide the Zoom & Mode button rightward to increase magnification, and Holding for continuous increasing Slide the Zoom & Mode button leftward to decrease magnification, and Holding for continuous decreasing Magnification range: Flat on the table: 3.8x – 16x...
Color Mode A color mode is a pre-defined color combination. Full color mode is suitable for picture, map viewing, and enhanced contrast mode is combined with different foreground and background colors and can help to reading clearly. Press the Zoom & Mode button to cycle in one direction through the color combination list...
Page 22
Long press the Zoom & Mode button for 2 seconds to quick switch between Full color mode and current enhanced contrast mode The Color Combination List (10 modes) Full Color White on Black Black on White ...
Brightness Adjust the display brightness for Full color mode and Enhanced contrast mode. Factory default value will be highlighted green. Combo: Holding Power button and Slide the Zoom & Mode button rightward to increase the brightness...
Combo: Holding Power button and slide the Zoom & Mode button leftward to decrease the brightness Lighting Combo: Holding Power button and click the Freeze button to turn on/off the LED Lighting...
Freeze Freezing an image on the LCD screen can be useful for further reading, and also further zooming in or zooming out or changing the color mode for a better view. The brightness adjusting is not allowed when freezing. Press Freeze button to lock the active image ...
Memory The unit will memorize automatically the most recent settings such as color mode, magnification, beep when power off normally and use them in the next power on. Auto power saving If no operation and no moving for over 3 minutes, the unit will turn off automatically.
Restore Holding the Freeze button and Zoom & Mode button at the same time for 5 seconds to reset to the default factory settings. Auto power off when resetting is done. Hardware Reset When the unit is hung or can’t be shut down normally, press the Power &...
Page 28
Mode button at the same time to trigger the hardware reset.
Page 29
Troubleshooting The unit does not turn on Connect to the power adapter Charge the battery Reinstall the battery Black screen or White screen If the unit is sitting on a flat pure surface, the screen may be black or white, Lift the unit off to ensure change happens...
Page 30
Adjust the magnification Adjust the color mode When the unit is connected to TV, the screen is black Restart the unit Reinstall the battery The image does not change If the unit enter the freeze mode, the image will not change...
Page 31
Press power button to check the current status Restart the unit Reinstall the battery Smudges or blemishes on the screen Adjust brightness Clean the LCD screen and camera Please contact your local distributor if problem is not solved...
Page 32
Specifications Display: 3.5 inch LCD Size: <=90*72*18mm Weight: <150 grams (Battery included) Color Mode:10 modes Magnification:3.8x – 16x (Flat on the table) Battery:Integrated rechargeable Li battery; 3 hours continuous use; charges in approximately 3 hours ...
Need help?
Do you have a question about the CLOVER 3 and is the answer not in the manual?
Questions and answers