inputs -
1/4" mono input with low/high gain switch and overdrive - 1/8" stereo input sums left and right channels to
mono.
power -
12v DC center positive 2.1mm x 5.5mm barrel 500ma minumum.
outputs -
1/4" mono output with selectable level (use a paperclip or pin to push the switch above the dry/wet
control) - 1/8" mono output on left and right channels.
comb resonance -
sets the feedback on the comb filter
itself.
comb rate -
controls the clock speed of the comb filter,
sweeping the frequency.
envelope - controls the decay of the envelope follower.
mod -
changes the amount of envelope signal which
affects either the comb rate or the room rate, selected
with the mod switch.
Lorre Mill 2023
Comb Room
lorre-mill.com/comb_room
input -
banana inputs. The gain switch selects gain for the 1/4"
input, 10x or 40x.
comb return -
filter to the room circuit. Return banana jack will over-
ride the normaled comb output.
dry/wet -
select switch connects either comb filter output or room
output as the wet signal.
room rate -
changing two echo lengths simultaneously.
controls the volume of the 1/4", 1/8" and
controls the feedback from the comb
is the blend of effected and dry signal. The
controls the clocks of the room circuit,