Table of Contents
Advertisement
Dots appearandremainontheLCDmonitor.
• This is not a malfunction.
These dots are not recorded
(page 7).
• You may reduce the effect of these issues using the "Pixel mapping"
flmction.
@ Set the LIVE VIEW/OVF
switch to "LIVE VIEW."
@ Attach the lens cap.
@ MENU button -_
% 3 -_ [Pixel mapping]
-_ [OK]
Theimageis blurred.
• The picture
was taken in a dark location
without the flash, resulting
in
camera
shake. The use of a tripod or the flash is recommended
(pages 47,
84).
TheEVscale< • isflashing onthe LCDmonitor or intheviewfinder.
• The subject is too bright or too dark I_r the metering
range of the camera.
Thecolorof an imagerecorded in LiveViewmodeis strange.
• In Live View mode, carefully
check the image disphtyed
on the LCD
monitor before shooting.
The camera
may not be able to recognize
the color
of the image right after switching
to the Live View mode. In such cases, the
expected
result may not be obtained.
Yourcamera cannot p laybackimages.
• The foMer/file
name has been changed
on your computer
(page 137).
• When an image file has been processed
by a computer
or when the image
file was recorded
using a model other than that of your camera,
playback
on
your camera
is not guaranteed.
• The camera
is in USB mode. Delete the USB connection
(page 135).
Theimagedoesnotappearonthe TVscreen.
• Check
whether
the connection
is correct
(page 114).
Yourcamera cannot d eletean image.
• Cancel
the protection
(page 11 1).
158
Advertisement
Table of Contents
