Selecting Stereo And Sap Broadcasts; To Listen To Stereo/Sap Broadcasts - Toshiba ColorStream TP50H50 Owner's Manual

_ BASIC OPERATION
Selecting Stereo and SAP
Broadcasts
• The MTS (Multi-channel TV Sound) feature allows you to improve your "IV viewing with
high fidelity stereo sound. MTS also provides for an extra audio channel, SAP (Second
Audio Program), used to transmit a second language or other audio information.
ENT_ER '_ _> V A
RECALL MUTE POWER
Q®®
®®®
®®®
E
531LL _ Ptp
TOBHIBA
If the stereo sound is noisy
If a broadcast signal is not strong
enough, and noise-free stereo sound is
not available, select "MONO" in the MTS
menu.
The noise should be reduced.
To listen to stereo sound
When the TV receives a stereo broadcast, the
word "STEREO" (or "SAP") is displayed on
the screen. It is also displayed whenever the
TV is turned on, a channel is selected, or the
RECALL button is pressed.
Press MENU, then press • or • until
the AUDIO menu appears.
STEREO
SAP
4
Press • (or •) until "MTS" is
highlighted.
3
Mrs m
BASS
TREBLE
BALANCE _-_
SPEAKERS
Press • or • to select "STR."
If a stereo broadcast is received, "STR"
will be displayed in yellow.
STR
BASS
TREBLE
BALANCE i
SPEAKERS
Normally this function can be left in the
stereo mode "STR'. Your TV will then
automatically reproduce either stereo or
monaural sound, whichever is broadcast.
To listen to a second language
Follow steps 1 and 2 above.
Press < or • to select "SAP."
You will hear only the second language
from the left and right speakers. SAP
BASS
TREBLE
BALANCE ii SPEAKERS
Notes:
• Be sure to select the "STR" mode if the broadcast is in stereo.
• The MTS function is not available while in VIDEO mode.
27