Table of Contents
Advertisement
Quick Links
Description
The filter system has three filter stage. The filter is designed to remove most liquid and solid particles from the air supply.
Specifications
Max. Temperature: 80℃
Air Inlet/outlet: 1/2"
Gauge Ports: 1/8"
Max. operating pressure: 10bar
Unpacking
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten
fittings, bolts, etc., before putting unit into service.
Safety Guidelines
This manual contains information that is very important to know and understand. This information is provided for SAFETY
and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.
DANGER
Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Information
This product is a part of a high pressure system and the following safety precautions must be followed at all times along
with any other existing safety rules.
Read this instruction manual before installing this device to the air supply system. Be thoroughly familiar with the controls
and the proper use of the equipment.
1.
Safety glasses must be worn during operation. Always work in a well ventilated area.
2.
Do not exceed any pressure rating of any component in the system.
3.
Protect air lines from damage and/or punctures.
4.
Check air hoses for weak or worn condition before each use. Make sure all connections are secure.
5.
Keep all nuts, bolts and screws tight and ensure equipment is in safe working condition.
DANGER
This product is specifically designed for compressed air service ONLY. Use with any other material (liquid or gas)
is a misapplication and not permitted. Use or injection of certain hazardous liquids or gases in the system (such as
oxygen, alcohol or liquid petroleum gas) will harm the unit and result in a combustible condition or hazardous
external leakage. misapplication will void all warranties and manufacturer's responsibilities.
DANGER
The relief flow capacity of regulators is limited. Install additional pressure relief devices to alleviate over
pressurized conditions. Written approval must be obtained from manufacturer if this device is to be used for life
support systems or other non-industrial applications.
3-STEP 1/2" AIR FILTER
General Safety
1
SA-2354A-I-1307A-HB
Advertisement
Table of Contents
Summary of Contents for Sumake SA-2354-1A
- Page 1 3-STEP 1/2" AIR FILTER Description The filter system has three filter stage. The filter is designed to remove most liquid and solid particles from the air supply. Specifications Max. Temperature: 80℃ Air Inlet/outlet: 1/2” Gauge Ports: 1/8” Max. operating pressure: 10bar Unpacking After unpacking the unit, inspect carefully for any damage that may have occurred during transit.
- Page 2 5. The water drainage shall be deployed beneath the water discharge for outlet of water into proper area. Function / Maintenance A. PRE-FILTER #SA-2354-1A 1. The first filter stage separates particles > 5µm as well as condensed water and oil.
- Page 3 A. Provide dated proof of purchase and maintenance records. B. Deliver or ship the SUMAKE product. Freight costs, if any, must be borne by the purchaser. C. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s)
- Page 4 1/2" DOUBLE-STAGE AIR FILTER (SINTERED FILTER, FINE FITLER) PARTS LIST Parts No. Description Q'ty SA2354-01 Body SA2354-02 Bowl SA2354-03 Bowl Baffle SA2354-04 Bowl Baffle SA2354-05 PE Filter 5μ (For SA-2354-1A) SA2344-06 Interceptor [SA-2344A] SA2354-07 O-Ring SA2354-08 Screw SA2354-09 Auto drain SA2354-10 Body SA2354-11 Bowl [SA-2344A] SA2354-12 Filter Element 0.01μ...
Need help?
Do you have a question about the SA-2354-1A and is the answer not in the manual?
Questions and answers