Advertisement
WARNING: Wait for the cutter to stop before setting the tool down. An exposed rotating cutter may engage the surface leading to
9
possible loss of control and serious injury.
Use clamps or another practical way to secure and support the work-piece to a stable platform. Holding the work-piece by your hand or
9
against the body leaves it unstable and may lead to loss of control.
Have your power tool services by a qualified repair person using only identical replacement parts. This will ensure that the safety of the
9
power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorised service
8
providers.
2. INTRODUCTION
Compact and well balanced planer with up to 1.5mm planing depth and up to 8mm rebate capacity. Easily adjust planing depth
from 0-1.5mm by turning the front grip. Dust collection port. Supplied with adjustable guides, spanner, hex key and dust collection
bag.
3. SPECIFICATION
Model No.. ....................................................... CP20VEP
Battery: ............ 20V 2Ah - 6Ah Lithium-ion (not included)
Maximum Planing Depth:: ..................................... 1.5mm
Noise power (Lwa) ................................................... 95dB
Noise pressure (Lpa) ............................................... 84dB
No load Speed: ................................................ 16000rpm
Planing Width: ........................................................ 82mm
Rebate Depth: .......................................................... 8mm
Uncertainty (K) ..................................................... 1.5m/s²
Vibration (ah) ..................................................... 6.13m/s²
Consumable parts
CP20VBP2 - 2Ah Battery, CP20VBP4 - 4Ah Battery,
CP20VBP6 - 6Ah Battery.
4. CONTENTS
Dust collection bag
Rabbet
Guide
5. OPERATION
Collection port lever
Plaining depth
adjustment
5.1.
ATTACHING THE PLANER TO A VACUUM
5.1.1.
Remove the battery pack before making any adjustments.
5.1.2.
Slide the collar of the dust collection bag onto the exhaust port.
© Jack Sealey Limited
Securing bolts
and washers
Trigger lock
Trigger
Dust collection attach bag
or extraction device
Original Language Version
The declared vibration total value(s) and the declared noise
emission value(s) have been measured in accordance with
a standard test method and may be used for comparing one
tool with another. The declared vibration total values and
the declared noise emission values may also be used in a
preliminary assessment of exposure
The vibration and noise emissions during actual use of the
power tool can differ from the declared values depending on the
ways in which the tool is used, especially what kind of workpiece
is processed. The need to identify safety measures to protect
the operator that are based on an estimation of exposure in the
actual condition of use.
CP20VEP
Edge guide
Battery
Kickstand
fig.1
fig.2
CP20VEP Issue 2 12/05/23
Advertisement
