Summary of Contents for germstar 80121
- Page 1 FLOOR STAND , Model 80121 assembly instruction / Montageanleitung / instruction de montage / istruzione d'assemblaggio...
- Page 2 Place the assembled pole into the base of the stand Screw together the two with the mounting plate floorstand posts until tightly facing forward. secured Turn the floorstand upside-down and use an Allen wrench to tighten the screw which will secure the post in place.
- Page 3 (4.) optional / Optional / facultative / facoltativo: fill with sand / mit Sand füllen / remlir avec le sable / riempire con sabbia III. (Optional) Fill the base of the floorstand with sand to increase stability III. Installing the floorstand sign holder...
- Page 4 Installing the Drip tray to the floorstand (Skip this step if you do not have a drip tray) Use a screwdriver to remove the mounting plate attached to the front of the floorstand. Mount the drip tray to the front of the floorstand using the screws from the floorstand.
- Page 5 450mm (17 3/4”) Local distributor / Distributor / Headquarter / Hauptquartier / Distributeur / distributore: Siège / quartier generale: , LLC 20562 Crescent Bay Dr. Lake Forest, CA 92630, USA Toll Free 1 800 327 2606 Tel. ++1 949 465 8955 Fax.
Need help?
Do you have a question about the 80121 and is the answer not in the manual?
Questions and answers