Download Print this page

Heat & Glo PORTRIM6-BR Quick Start Manual page 2

Portrait decorative front trim

Advertisement

3. Install the top trim piece by placing it over the inner
edge of the front. Hook the back of the trim over the
base extrusion and then rock it forward. Lightly tap it
with a rubber mallet to snap into place, starting in the
middle and working toward the sides. See Figure 2.
ASSEMBLED SIDE PROFILE DETAIL
MESH
PORTRAIT
DECORATIVE TRIM
Figure 2
4. Repeat step 3 for the left and right sides of the front.
5. To install the bottom piece, hold the trim by the ends
with the front edge facing you. Slightly bow the trim
piece so that you can engage the left and right ends
under the bottom of the left and right trim pieces. Be
careful not to scratch the trim or the decorative front.
Once in place, lightly tap it with a rubber mallet to snap
it into place. See Figure 3.
6. Ensure all of the trim pieces are fully seated with an
even reveal as illustrated in Figure 3. To remedy an
uneven reveal, place an object with a blunt edge, such
as a block of wood, and tap lightly in order to seat the
trim piece.
7. Install the Portrait Decorative front, complete with trim,
on the appliance according to the instructions included
with the decorative front.
2
PORTRAIT
DECORATIVE
FRONT
Heat & Glo • 2595-931 Portrait Trim Instructions • 2595-931 • 5/22
Place left and right ends in position
Fully Seated - Even Reveal
Figure 3
Cleaning Instructions for Decorative Fronts and Trim
Use a microfi ber cloth and Windex® Original Glass
Cleaner to clean the decorative front immediately after
installation to remove acids deposited by the installer or
technician. Spray the cleaner onto the microfi ber cloth
and carefully wipe the entire surface. The decorative
front should be cleaned in this manner annually by the
homeowner to remove fi ngerprints or other contaminants.
Once oxidation of the fi nish has occurred, cleaning will
not restore the original color.
Please contact your Heat & Glo dealer with any
questions or concerns.
For the location of your nearest Heat & Glo dealer,
please visit www.heatnglo.com.
Heat & Glo, a brand of Hearth & Home Technologies
7571 215th Street West, Lakeville, MN 55044
www.heatnglo.com
Not Fully Seated - Uneven Reveal

Advertisement

loading

This manual is also suitable for:

Portrim6-coPortrim6-niPortrim8-brPortrim8-coPortrim8-ni