Performance Checklist; Final Preparation; Replacement Parts - Viking Designer DECU105 Install Manual

45" W. DECU ELECTRIC COOKTOP
WARNING- THIS UNIT MUST BE GROUNDED. SEE INSTALLATION
INSTRUCTIONS FOR PROPER GROUNDING PROCEDURES
NOTE: TRAILERS OR STRIPES WILL BE THE SECOND COLOR IN A COLOR
COMBINATION

PERFORMANCE CHECKLIST

A qualified installer should carry out the following checks:
1. Check top surface elements - glow red when turned on.
2. Check hot surface indicator lights - glow red when corresponding element is hot.
Any adjustments necessary that are a result of the installer not following instructions will be the responsibility of the
installer, dealer of the end user of this product.

FINAL PREPARATION

1. Some stainless steel parts may have a plastic protective wrap which must be peeled off.
2. All stainless steel body parts should be wiped with hot, soapy water and with a liquid cleaner designed for this
material. If buildup occurs, do not use steel wool, abrasive cloths, cleaners, or powders! If it is necessary to scrape
stainless steel to remove encrusted materials, soak with hot, wet cloths to loosen the material, then use a wood or
nylon scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel! Scratches are
almost impossible to remove.

REPLACEMENT PARTS

Only authorized replacement parts may be used in performing serivce on the cooktop. Do not repair or replace any
part of the appliance unless specifically recommended in the manual. All other servicing should be referred to a
qualified technician.
F20034K
WIRING DIAGRAM
VIKING RANGE CORPORATION
111 Front Street • Greenwood, Mississippi 38930 USA • (662) 455-1200
Specifications subject to change without notice
(PS042607J)