/
%
MEMORY
%
TUNFJSKIP/SEARCH
MEMORY
%
Preset channel
TUNE/SKIP/SEARCH
MEMORY
%
•
Up to ten FM and AM stations each can be programmed.
•
If broadcast frequencies
are preset in the memory,
you can easily
tune in any of these frequencies.
•
You can preset just those stations you like.
B
Press BAND to select "FM" or "AM".
Every timeyoupress thebutton: FM _ AM
_]
Press MEMORY.
"_
"and the frequency flash.
[_'1
While"
_
" and the frequency are flashing:
Press -/I,4<1 or +/1_1_1 to select the desired station.
"maim"
lights when an FM stereo program
is being received.
You can select the desired
broadcast
by using
"Automatic
tuning". (See page 8.)
L_
Press MEMORY.
" _
" and the preset channel number flash.
D
hile " _
"and
the preset channel number are
flashing:
Press --/!<1<1or +/b,tH to select the preset channel.
!]
ress MEMORY.
If the"
_
" indicator
goes off during programming,
return
to step 2.
Repeat steps 2 to 6 to program other stations.
I
I To erase
an unwanted
preset
channel
e.g. erasing preset channel 3.
I
1. Select preset channel 3 (see page 8).
2. Press MEMORY twice ("l_"
and the preset channel number
flash).
3. While "f:J'e[_l" and the preset channel number are flashing:
Press --/!<1<1 or +/11_1_1repeatedly
until the preset channel
display indicates "-- --'.
4. Press MEMORY.
The erased preset channel will now be skipped when selecting preset
channels. (e.g. 1-,2-'4-'5....)
IFM allocation
setting
]
By adjusting the allocation, you can enable this tuner to receive FM
broadcasts
allocated
in 0.1 MHz steps.
1. Press and hold BAND for approximately
5 second_g
AM
display. The frequency
display will be returned to the minimum
frequency
of the FM band and the display will begin to flash. Keep
holding
for approximately
5 more seconds.
•2. When the display stops flashing and indicates a different frequency
number, release BAND.
To return to the original frequency, repeat steps I to 2 above.
[_P3"
After changingthe"allocation"
setting, thefrequencies you previously
preset inthememory will be cleared.
i
i