Pioneer PL-X420 Service Manual page 34

Table of Contents

Advertisement

=] BD €- 7-18 ]'=1,@)
13.3.6
Return Mode
If the tonearm
is DOWN, it is raised UP and if
completion of UP operation is detected after one
second
has elapsed, turntable rotation is stopped
and the tonearm is brought to the armrest.
The Repeat switch is functional along with the
following operations:
@
Normal return
Play SW, Stop SW and Repeat SW are functional.
1. Repeat SW---This
switch
alternately
turns
the
repeat
function
ON
and
OFF.
2.PlaySW---
After
the tonearm
returns
to
the armrest, operation switches
to
lead-in
mode
for
fully
automatic play.
3.StopSW:
- - This switch clears the play or
repeat operation
during return
mode.
@
Repeat return
Repeat SW.and Stop SW are functional.
1. Repeat SW--- This
switch
alternately
turns
the
Repeat
function
ON
and
OFF.
This
switch
clears the Repeat
function
and
switches
to
a
normal return operation.
2. Stop SW: ::
13.3.7
UP mode
This mode lights the UP LED, turns ON muting
and
raises
the tonearm.
After
1.7 seconds
have
elapsed since the UP operation was initiated, the
UP
operation
is completed
by the timer.
This
switch is functional when the tonearm is in a raised
position or being lifted UP.
All switches are functional.
1. Repeat SW:
- - This switch turns the Repeat
function
ON
and OFF
alter-
nately.
This switch
is not functional
when
the
tonearm
is being
raised.
Operation
switches
to
down-tracking mode when the
tonearm is UP.
This switch
is not functional
when
the
tonearm
is being
raised.
Operation
switches
to
locate
mode
when
the
to-
nearm is UP.
This switch
is not functional
when
the
tonearm
is being
raised.
Operation
switches
to
locate
mode
when
the
to-
nearm is UP.
2. EVSW:--:-:
3. 42 SW:::
4.
> SW---
46
5. Stop SW: :-
This switch clears the Repeat
function and operation switch-
es to return mode.
6. Play SW-:-:-
This switch
is not functional
when
the
tonearm
is being
raised.
Operation
switches
to
down-tracking mode when the
tonearm is UP,
13.3.8
Locate Mode
This mode is part of the UP mode and is engaged
when
the
< or
P
switch is held down during
manual or fully automatic play.
1.When
the
<
SW
is pressed,
the tonearm
moves toward the center of the record until it
reaches the position corresponding to $106, at
which time the time it stops. The
> SW is not
functional then.
2.When
the
Pp
switch is pressed, the tonearm
moves toward the outer edge of the record. It
stops at the armrest and the
P
switch is not
functional in that position.
Because
the
PL-X420
key matrix
system
is
used, simultaneous pressing of multiple keys is not
allowed. If this occurs. The locate operation stops.
When
the
<
or
P_
switch
is not pressed,
tonearm
movement
stops and operation switches
to normal UP mode.
Possibility of SW input in each mode.
@ Full Automatic Play Mode
IMODE
Rest
Lead-out
Lead-in
Down trace
Return
Up
Rokate
b
ce)
x
1)
x
1@)
x
oO
e)
oO
x
oO
G
*K
K
>» Prohibit pushing twice
Note 1. REPLAY
Note 2. switch to manual
@ Manual Play Mode
Return
Up
%« Prohibit pushing twice
Note 1. switch to fully automatic.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pl-x420bk

Table of Contents