Advertisement
4
AC Adapter
(DC 6V, 800MA)
IMPORTANT: This product can be powered by a UL Listed, 6 Volt 800 MA adapter (included) in place of using
batteries. Adapter should be plugged into 100V-240V household outlet.
NOTE: WHEN THE CONNECTOR OF ADAPTOR PLUG INTO THE JACK, POWER FROM 4 AAA
BATTERIES WILL STOP IMMEDIATELY. SUGGEST UNPLUG IT IF YOU WANT TO USE BATTERY POWER.
WARNING: THE INCLUDED BATTERY CASE IS FOR IN STORE TRY ME PURPOSE. PLEASE REMOVE IT
AND USE ADAPTOR PROVIDED WHEN YOU USE THE ITEM OUTDOOR.
TO ACTIVATE:
The ON/DEMO/LIGHT switch is located under the LED lamp. Place the switch into the "ON" position to activate
the Snow-Blowing feature, the LED lights and to play a full version of the seasonal music. Please note that there
are 8 different Christmas melodies included with your LED Lamppost and will play when in the "ON" position.
These melodies include "Deck the Halls," "Hark! The Herald Angels Sing," "Jingle Bells," "Joy to the Word," "O
Christmas Tree," "Silent Night," "The First Noel" and "We Wish You a Merry Christmas". Place the switch into the
"DEMO" position and press the large "Try-Me" button to see and hear a short version demonstration of the
Snow-Blowing effects with LED illumination and to hear one of the eight Christmas melodies. Please note that
each time the large "Try-Me" button is pressed, a different melody will play. Place the switch in the "LIGHT"
position for Snow-Blowing, LED lights and timer feature. When the timer feature is activated, the lights and
Snow-Blowing will automatically turn ON for 6 hours and will shut OFF for 18 hours. Replace batteries if the
LED's become dim or sound is distorted or faint.
Plug the large
try me button
A
B
3
BATTERY USAGE:
ADULT SUPERVISION IS RECOMMENDED WHEN CHANGING BATTERIES.
1. Do not mix old and new batteries.
2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. Alkaline batteries are suggested for longer life.
4. Exhausted batteries are to be removed from the product.
5. Dispose of exhausted batteries with care.
6. Do not dispose of batteries in fire, batteries may explode or leak.
CAUTION: Please remove batteries if their power is consumed or if the product is to be left unused for a long
period of time.
RECYCLE YOUR BATTERIES: To help protect our environment, we recommend that all batteries be recycled.
You can find a local recycling center by going to: http://earth911.com/hazardous/single-use-batteries/ Or, in the
United States call 1-800-CLEANUP for a recycling location near you.
SAFETY INSTRUCTIONS:
1. Read all of the instructions before operating the LED Lamppost. Retain these instructions for future
reference.
2. All warnings in these operating instructions should be followed.
3. Do not place the LED Lamppost near any open heat sources, such as a fireplace, heater, radiator, etc.
4. Do not place this item near any heat source such as a stove, radiator, heater, fireplace, etc.
5. This item should only be serviced by a qualified repair person. Do not attempt to service this unit beyond
what is described in the operating instructions.
6. Take extra care when using the LED Lamppost around small children.
7. Do not disturb any moving parts as this may cause damage to your item.
8. The LED Lamppost should only be used on a water-resistant, level surface.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: "(1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation."
Responsible party for FCC: Pan Asian Creations Limited.
Address: PO Box 165, New Hartford, NY 13413
For FCC assistance email: info@pan-asian.com.hk
READ CAREFULLY & RETAIN FOR FUTURE REFERENCE!
Printed in China
4
Advertisement
