1. Manuals
  2. Brands
  3. TMG Manuals
  4. Service Equipment
  5. TMG-ARB04
  6. Product manual

TMG -ARB04 Product Manual

4/10 ton body repair kit
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

WARNINGS-SAFE USAGE
► www.tmgindustrial.com
0/6
TOLL FREE:1-877-761-2819

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TMG-ARB04 and is the answer not in the manual?

Questions and answers

Summary of Contents for TMG TMG-ARB04

  • Page 1 WARNINGS-SAFE USAGE ► www.tmgindustrial.com TOLL FREE:1-877-761-2819...

  • Page 2: Safety Information

    SAFETY INFORMATION Save these instructions. For your safety, read, understand, and follow the information provided with and on this product before using. The owner and/or operator of this equipment shall have an understanding of safe use/operating procedures before attempting to use. The owner and/or operator shall be aware that the use of this product may require special skills and knowledge.
  • Page 3 ASSEMBLY INSTRUCTIONS TO ASSEMBLE HYDRAULIC RAM, PUMP UNIT, AND ATTACHMENTS 1. Unscrew and save the End Plugs located on the ends of the Hose and Hydraulic Ram. 2. Securely screw the Hose into the Hydraulic Ram.(See Figure A) Figure A 3.
  • Page 4 OPERATING INSTRUCTIONS TO OPERATE THE HYDRAULIC PUMP UNIT 1. Position the Pump Unit on a stable, flat and level surface close to the damaged area. 2. Firmly close the Release Valve Stem by turning it clockwise and pump the Pump Handle to apply pressure. 3.

  • Page 5: Care And Maintenance

    TO USE THE SPREADER WEDGE 1. Determine which direction the frame needs to be bent. 2. Remove any obstructions that could be damaged or are in the way. 3. Place Spreader Wedge so that the hinged arm is resting against the part to be moved and the stationary arm is resting against a non-movable base.
  • Page 6 REPLACEENT PARTS LIST Not all components of the jack are replacement items but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give model number, serial number and description below. PART DESCRIPTION Extension Tube 19-1/2”...

  • Page 7: Troubleshooting

    TROUBLESHOOTING SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION Releases valve not tightly closed. Firmly close release valve. Ram won’t lift load Overload condition air trapped in Remedy overload condition system Purge away air from system Release valve not tightly close. Firmly close release valve Ram won’t maintain hold Hydraulic unit malfunction Replace ram and/or pump...

This manual is also suitable for:

Tmg-arb10

Table of Contents