Download
Share
Print this page
  1. Manuals
  2. Brands
  3. malkans Manuals
  4. Enclosure
  5. SF8G
  6. Assembly instructions manual

malkans SF8G Assembly Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
SF8G
Assembly Instructions
© malkans ltd

Advertisement

loading

Related Manuals for malkans SF8G

Summary of Contents for malkans SF8G

  • Page 1 SF8G Assembly Instructions © malkans ltd...
  • Page 2 Warning Do not overtighten screws. Overtightening will damage the head and threads of the screws. Case structure fragile during assembly. Construct with care and avoid unnecessary movement. Remove the protective layer from both sides of all case panels before assembling the case.

  • Page 3: Parts List

    Parts List Front Panel Right Panel Back Panel Left Panel Top Panel Bottom Panel Aluminium Nut Power Switch M3 x 8 mm M3 x 6 mm M3 x 5 mm 6-32, 3/8” Button Head M5 x 10 mm Case Feet M3 x 8 mm Hexagonal Nut Button Head...
  • Page 4 Step 1 Use 4 M3 x 8 mm screws to attach 4 Aluminium Nuts to the Right Panel, making sure that the corners of the Aluminium Nuts are aligned with the corners of the panel.
  • Page 5 Step 2 Install your CPU, CPU Cooler, RAM and M.2 SSD to your Motherboard. (Refer to your motherboard instruction manual)
  • Page 6 Step 3 Align your Motherboard with the standoffs on the Right Panel and use 4 M3 x 5 mm Button Head screws to attach the Motherboard to the Right Panel.
  • Page 7 Step 4 Use 2 M3 x 8 mm screws to attach the Back Panel to the Right Panel. Tip: The holes in the panels are slightly larger than the screws to allow for adjustments. During the build, you may loosen screws, adjust panels and retighten screws to ensure that all panel edges are correctly aligned.
  • Page 8 Step 5 Use 2 M3 x 8 mm screws to attach 2 Aluminium Nuts to the Back Panel.
  • Page 9 Step 6 Use 4 M5 x 10 mm screws to attach your 140 mm case fan to the Top Panel. Tip: The arrow on the side of your case fan indicates the direction of airflow. We recommend installing the fan so that it blows air out of the case. Tip: Lay the case fan and top panel flat for better stability to drive the screw in straight and ensure that the screw head sits flush with the top panel.
  • Page 10 Step 7 Attach the Power Switch to the Top Panel.
  • Page 11 Step 8 Connect the power supply cables, case fan cable and power switch cable to the corresponding motherboard connectors. Refer to your power supply and motherboard instructions manuals.
  • Page 12 Step 9 Use 3 M3 x 6 mm screws to attach the Top Panel to the case.
  • Page 13 Step 10 Use 4 6-32, 3/8” screws to attach your SFX power supply unit to the Back Panel and connect the loose power cables to the Power Supply Unit. Refer to your power supply instructions manual. Tip: Use cable ties for a tidy look and to prevent cables obstructing the case fan.
  • Page 14 Step 11 Connect your Graphics Card to the Motherboard and Power Supply Unit.
  • Page 15 Step 12 Use 4 M3 x 8 mm Button Head screws and 4 Hexagonal Nuts to attach 4 Case Feet to the Bottom Panel.
  • Page 16 Step 13 Use 2 M3 x 6 mm screws to attach the Bottom Panel to the case. Tip: Ensure that the bottom panel is attached in the correct orientation as shown below, so the corners align with the corners of the right panel.
  • Page 17 Step 14 Use 2 M3 x 6 mm screws to attach 2 Aluminium Nuts to the Bottom Panel.
  • Page 18 Step 15 Use 1 M3 x 6 mm screw to attach 1 Aluminium Nut to the Top Panel.
  • Page 19 Step 16 Use 1 M3 x 8 mm screw to attach 1 Aluminium Nut to the Corner Piece of the Back Panel.
  • Page 20 Step 17 Use 1 M3 x 8 mm screw to attach the Corner Piece of the Back Panel to the Bottom Panel.
  • Page 21 Step 18 Use 6 M3 x 8 mm screws to attach the Left Panel to the case. Tip: If your Graphics Card with power cable connected exceeds the width of the case, you may use a 90 or 180 degree adapter (not included) to change the angle of the cable entering the Graphics Card.
  • Page 22 Step 19 Using both hands, lift and rotate the case onto its feet. Then use 4 M3 x 8 mm screws to attach the Front Panel to the case.

  • Page 23: Cleaning And Care

    [ ! ] Use of liquids/chemicals may cause damage to metal parts. [ ! ] Always use both hands to support the case when moving. Help and Feedback For further assistance, or to provide feedback, please use the contact form at www.malkans.com...
  • Page 24 © malkans ltd...