PANL PD40 Quick Start Manual

PD40 Display
Quick Start Guide
Product Features
1 Buzzer - Trigger sound to user to signify an event
2 Reset – Hardware reset PD40 device
Mounting
PD40 Display supports wall mount, glass mount, 86 type electrical
box mount and metal electrical box mount. Please set the device
ID (0-7) before assembling panel. Refer to ID Switch Configuration
section. Refer to the datasheet for detailed instructions.
Wall Mount
1.
Glass Mount
2.
86 Type Electrical Box Mount
3.
Wall Box Mount
4.
PD40 Rear Cover Mounting Bracket P/N:PA001500A
PD40 Wall Box Mounting Bracket P/N:PA001400A
❶
❷
Please visit http://brtsys.com/warranty
for warranty registration with the UUID and Product Key
below:
STICKER AREA
Use the RJ45-JST8 cable (provided in PD40 product package)
➢
to connect the PD40 Display to a suitable PanL Hub port.
For a single PD40 Display connection to a PanL Hub port, the
➢
maximum length of the RJ45 8P8C cable is 100 meters. The
RJ45-JST8 cable has an RJ45 plug. Therefore, note that an
RJ45 socket to RJ45 socket adapter needs to be used if the
extension cable is a plug-to-plug type such as an Ethernet
patch cable.
A maximum of 4 PD40 Displays can be connected to a single
➢
PanL Hub port. The first connection to PanL Hub and the
subsequent connections in between the PD40 Displays must
not exceed 50 meters in cable length. The total combined
cable lengths must not exceed 100 meters. 1 to 2 port RJ45
adapters are needed. The last device ID must be set to 7. See
ID Switch Configuration.
ID switch at the back of PD40 display can be configured for
➢
unique settings. Use a Philips head screwdriver to set a unique
number between 0-7 (8- 9 are reserved).
For a single device connected to PanL Hub, the ID must be
➢
configured to 7 to enable the RS485 terminator.
For multiple PD40 Display connections to a single PanL Hub
➢
port, the ID switch must be configured to be unique. The last
device ID must be configured to 7 to enable the RS485
terminator.
PD40 devices connected to different PanL Hub ports can use
➢
the same ID number.
or scan the QR code
Display Installation
RJ45-RJ45
ID Switch Configuration