Download Print this page

ROKAMAT Tigris 850 Original Instructions Manual

Tigris 850

Art.-Nr. 53000

Rokamat Tigris 850 (22TI85001)

2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU,

2001/95/EG, EG No. 1907/2006

EN 62841-1:2015+AC:2015, EN ISO 12100:2010

4) Kammerer GmbH, An der B 10, 75196 Remchingen

Remchingen, 01.03.2023

Beate Kammerer

Head of Technical Documentation

Technische Änderungen vorbehalten. BA_Tigris 850_EN_007

Original Instructions

ROKAMAT

Kammerer GmbH

An der B 10

75196 Remchingen

Deutschland

www.rokamat.com

Table of Contents

Need help?

Do you have a question about the Tigris 850 and is the answer not in the manual?

Page 1 Tigris 850 Art.-Nr. 53000 Original Instructions Rokamat Tigris 850 (22TI85001) 2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU, 2001/95/EG, EG No. 1907/2006 EN 62841-1:2015+AC:2015, EN ISO 12100:2010 4) Kammerer GmbH, An der B 10, 75196 Remchingen Remchingen, 01.03.2023 Beate Kammerer Head of Technical Documentation...
Page 2 Tigris 850...
Page 3 Tigris 850 [10] 10-1 10-2 10-3 10-4...
Page 4: Safety Instructions
1200 mm and a max. density of 650 kg/m³ can be Wear a dust mask! * If the impeller tensioner is already at the end stop, cut using only the Rokamat special saw wire. and Don’t bend the flexible drive shaft! the impellers must be switched.
Page 5: Technical Specifications
Move out the cutting bow [1-2]. Loosen the star grip CAUTION! WARNING! screw [10-2] at the top and bottom and slide the Cordless wire saw Tigris 850 depth limit to the desired dimension (see scale on Risk of injury! Danger of tipping! Art.-Nr. 53000 Risk of injury! Warning of hand injuries! the cutting bow).
Page 6: Troubleshooting
(fold in). Fold up the stabilising arm [1-8] and then 10. Environmental Protection If problems other than those listed occur, please contact your ROKAMAT service workshop or your local the stand [1-6] and fix them in place. specialist. The generated sawing dust may contain harmful Fuse replacement substances.

53000