Vixen Wireless Unit Instruction Manual page 13

V. Starting up the App
Basic Operation 1 / Menus on the Screen
(1) Wireless Unit Components Guide
Reset button
Pressing this button a little
longer (over one second) will
initialize the unit to settings at
Vixen's factory.
Power indicator
If it lights red: Power ON
If it goes off: Power OFF
Connector to mount
This is a D-sub 9pin male con-
nector for connecting the unit
to the controller cable
port on a mount.
Attachment screws
Attach the unit to the controller
cable port on the
mount body with these two
screws.
It indicates wireless connec-
tion status.
Disconnected if it lights red.
(No communication) Connec-
ted if it lights blue. (During
communication)
Autoguider Port (A.G.)
It is possible to connect an ex-
ternal autoguider with the unit
by using an autoguider cable.
A.G. Pinout
13
Wireless indicator