Fcc Notice - Pure Enrichment pure relief DESIGNER Series User Manual

FCC NOTICE

Model: PureRelief Express Designer Series Heating Pad (PECERDIA)
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Pure Enrichment
2803 S. Yale St.
Santa Ana, CA 92704
pureenrichment.com
The product is protected against unauthorized use. DO NOT
modify it without the authorization of the manufacturer, or the user's
authority to operate could be voided.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
4 2
INTRODUCTION
Thank you for purchasing the PureRelief Express Designer
Series Heating Pad from Pure Enrichment. We created a vibrant
fabric cover for this non-vinyl heating pad to add a touch of style
to your temporary heat therapy. Use it as needed to relax the
muscles in your back, legs, arms, and more.
USING PURERELIEF EXPRESS
To turn PureRelief Express on, press the power button. Select
the desired heat setting by continuing to press the power button
until the heat indicator light is the color of your desired heat
setting:
Green=Warm
Yellow=Low
To turn PureRelief Express off, scroll through all the heat settings
until the heat indicator light turns off.
NOTE: The "high" indicator light will blink red when an error
occurs. If this happens, unplug PureRelief Express from the
electrical outlet. Check the physical condition of the cord and the
wall outlet.
If the blinking persists after you confirm a proper connection,
contact Pure Enrichment at: help@pureenrichment.com
Orange=Medium
Red=High
5 3