network connection and setup & webviewer
USING DEVICE MANAGER
`
M
Device manager program can be downloaded from <Support>-<Online Tools> menu at Hanwha Vision
website (https://www.HanwhaVision.com).
`
More instructions of Device Manager can be found at <Help> menu of the main page.
AUTOMATICALLY SEARCHING CAMERA
If a camera is connected to the same network of the PC where device manager is installed, you can find
network camera by using search function.
1. Click <Search> at the main page of device manager.
2. Check the camera from the list.
~ Check MAC address at the sticker attached to the camera.
CONFIGURING IP ADDRESS
If you want to change camera network setting, <Login OK> sign must be displayed at <Status>. Click
<Authentication> at the main page to log in.
Configuring Static IP
Manually insert and configure IP address & port information.
1. Click the camera from the list that you want the change the
IP setting.
2. Click <IP Assign> at the main page of device manager.
3. Select <Assign the following IP address>.
~ IP information of the camera will be displayed as previously
set.
4. Fill in IP & Port related categories.
If not using a Broadband Router
For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network administrator.
~ HTTP Port : Used to access the camera using the Internet browser, defaulted to 80.
~ RTSP Port: A port that controls real-time streaming. The initial value is 554.
20_ network connection and setup & webviewer