Table of Contents
Advertisement
Preparation
for using your new TV
For subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/DescramNer
box, connect the CATV 75 ohm Coaxial Cable
directly into the Antenna lack on the back of the television.
[:or subscribers
to Scrambled
Cable TV Service
If you subscribe to a cable service which requires the use of a Converter/Descrambmer box, connect the incoming
came to the Converter/Descrambmer box and connect the output of the box to the Antenna Jack on the back of
the temev[s]on. Fommow t he connections as shown bemow.Set the temev[s[onto the output of the
Converter/Descrambler
box (usually channel 3 or 4) and use the Converter/Descrambler
box to select channels.
For Subscribers to Unscrambled
Basic Cable with Scrambled
Premium
Channels
If you subscribe to a cable service in which basic cable channels are unscrambmed and premium channemsrequire
the use of a Converter/Descrambled
box, you may wish to use a twooset s[gna[ spm[tter(sometimes referred to
as a two°set coupmer) and an A/B Switch box from the cabmeinstammer or an emectron[cs supply store. Folmowthe
connections shown bemow.With the switch [n the B position, you can directly tune any unscrambmed channemson
your TV. With the switch [n the A position, tune your TV to the output of the Converter/Descrambmer box (usuammy
channe[ 3 or 4) and use the box to tune scrambled channems.
m_Splitter
AiBSwitch
Lr _
Note:
When you use a converter box with your TV_ there may be featuresthat you cannot
program
when using the remote contro[.
11
Advertisement
Table of Contents
