Advertisement
Quick Links
Installation / Fitment Guide
CRC534 or CRF334
Install at your own risk! ASV Inventions INC. accepts no liability
for failures or malfunctions due to improper installation.
Please confirm your vehicle year, make, and model before attempting
installation.
KTM
125 Duke / RC
200 Duke / RC
250 Duke
390 Adventure
390 Duke / RC
TOOLS:
1.
8mm wrench
2.
Philips screwdriver
1: REMOVE THE NEUTRAL KILL SWITCH
1a) Find the neutral kill switch underneath the OEM lever. Use a Philips
screwdriver to remove the two screws holding the switch in place.
YEAR
HUSQVARNA
14-24
Svartpilen 125 / 200 / 250
14-24
Svartpilen 401
15-20
Vitpilen 401
20-24
13-24
1b) Remove the neutral kill switch from the perch
2: UNINSTALL THE OEM LEVER
2a) Find the locknut underneath the OEM lever that holds the pivot
bolt in place. Use an 8mm wrench to remove the nut.
2b) Use the Philips screwdriver to remove the main pivot bolt and
remove the lever.
YEAR
22-24
18-24
18-24
2c). Loosen the clutch cable by twisting the clutch cable adjuster as
close as possible to the perch. Line up the openings on the cable
adjusters and guide the clutch barrel out of the OEM lever.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ASV CRC534
Summary of Contents for ASV CRC534
- Page 1 2a) Find the locknut underneath the OEM lever that holds the pivot bolt in place. Use an 8mm wrench to remove the nut. Install at your own risk! ASV Inventions INC. accepts no liability for failures or malfunctions due to improper installation.
- Page 2 3: INSTALL THE ASV LEVER 5: SETTING AND TESTING 3a) Guide the clutch barrel into the ASV lever and place the ASV 5a) With the bike off, shift into first gear. Fully engage the clutch lever lever into the perch. Secure with the original pivot bolt.
Need help?
Do you have a question about the CRC534 and is the answer not in the manual?
Questions and answers