Panasonic RX-C300 Service Manual page 5

RX-C300
Tuner circuit board
oe
k
Cassette Dec
Front cabinet
Pull out the tape amplifier circuit board until it is possible to remove the
switch circuit board
Power transformer
Battery circuit board
Push the tooth and remove the circuit board in the direction of arrow.
Pull out the gear
Cassette holder Push the cassette holder in the direction of arrow @.
Remove the spring in the direction of arrow ©.
Front cabinet «1, 2
* 1. Turn the drum gear in the direction of arrow @ as shown in fig. 9.
*2. Set the pointer at the position as shown in fig. 13.
*3. The speaker box is made of a relatively soft material (9-mm-thick particle board). Be careful not to tighten the screws excessively when
attaching anything to the box in order not to damage the threads.
elf the threads are damaged, also use a bonding agent to attach the speaker box stopper to the speaker box so that the speaker box does not
fall when attached to the main unit (tuner amplifier block or cassette deck block).
=> Fe