Download Print this page

Safavieh Lighting ELIS FLL7000A Quick Start Manual

Advertisement

Quick Links

NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item.
Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email
customersupport@safavieh.com.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum_brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the
material.Avoid the use of chemicals and household cleaners as they may damage the finish.
PEICE
DESCRIPTION
PICTURE
Jam Nuts
HW1
⊘ 12MM
Tooth Lock washer
HW2
⊘ 13MM
C
Lamp Base
D
Pipe 1
E
Pipe 2
G
Pipe 3
HW3
Screws ⊘ 4mm
Phillips Screws ⊘
HW4
4mm
Part List and Hardware List
QUANTITY
PEICE
1X
I
1X
J
1X
K
1X
L
1X
M
1X
HW5
3X
HW6
3X
HW7
DESCRIPTION
PICTURE
QUANTITY
Pipe 4
1x
Pipe 5
1x
Shade
1x
Lock Ring
1x
Bulb
1x
Allen Key
1x
Allen Key
1x
Wrench
1x
1/2
Model#FLL7000A
Product Dimensions:
12"Lx41.7"Wx76.5"H

Advertisement

loading

Summary of Contents for Safavieh Lighting ELIS FLL7000A

  • Page 1 NOTICE * Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item. Refer to part list and hardware list below for guidance. * This item should be assembled on a soft surface to prevent scratching the finish during assembly. * This item may require periodic tightening.
  • Page 2 PREPARATION * Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list. * If any part is missing or damaged, do not attempt to assemble the product. * Estimated Assembly Time: 10 minutes. 1:Install the pipe 1(D) into the base in front side, and Step 2: Install the shade(K) to the socket and lock it with the ring(L).