Identification Of Components - Panasonic CT-27C8G Service Manual

2. Normalize the picture settings.
PROCEDURE
1. Enter to service mode
2. Check a and b sizes, If b-a < -1.5mm (in top & bottom extending
case)
- Increase "V-S" DATA by one step
NOTE
Repeat "a" and "b" until b-a ± 1.5mm
3. Confirm to make outermost circle of monoscope pattern a correct
circle

13. Identification of Components

13.1. Chassis Components
V-Adjustment
Rear view (inside cabinet)
30