Notice: iOS USB playback requires a Camera Connection kit.
Mic Selection with a Computer
When using AONIC 50, Gen 2 headphones with a computer connected through a USB cable, use Device Manager > Audio
inputs and outputs to specify
•
Headset - to use the mics in the AONIC 50
•
Headphones - to use a third-party mic
USB Charging
The USB cable always recharges the battery in the headphones, regardless of USB mode. If you are using a mobile device
with a USB cord and are worried about draining your battery, you can control charging in the PLAY app under When to Charge.
Auto Power Off
You can configure the Auto Power Off feature in the PLAY app to turn off your headphones when not in use:
1.
Select When to Charge
2.
Specify the auto power off time in Power Off When Disconnected
◦
After 10 Minutes (default)
◦
After 1 Hour
◦
After 4 Hours
◦
Never
Customizing the ANC switch
Using the PLAY app, you can customize the ANC switch to provide an enhanced listening experience. Select Customize Slider:
Shure Incorporated
11/24