Page 3
All rights reserved. No part of this publication can be reproduced, placed in an automated database, photocopied, copied or released into the public domain, in any shape or form or in any other manner, be it electronic or mechanical, without prior written consent from Dehaco B.V.
Page 4
Translation of original user manual according to annex 1, section 1.7.4. of Machinery Directive 2006/42/EC. We, Dehaco B.V., hereby declare that the products listed below comply with the essential requirements of the above-mentioned European Directive and the following harmonised standards:...
Page 6
The 400V Dehaco TERA dust control units have been primarily developed for outdoor use. This units have been Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...
Page 8
When considering other applications, please contact Dehaco IN ADVANCE to discuss whether the machine is actually suitable. WARNING! The Tera 60 Dust Control Unit does NOT comply with the ATEX guidelines! Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...
Page 12
Release both rotation and tilt transport locks to use the rotation and tilt functions. Grounding pen and wire Follow the generator manual instructions! Ø Rotation and tilt transport lock * = GTM only Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...
Page 14
If the Tera reaches the end point of the Tera, the operating range will only increase in the opposite direction. Diagram 1 – Automated shuttle system setup Diagram 2 – Automated shuttle system adjustment Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...
Page 16
The UVC6000 system can also be manually turned off by pressing the blue button. If there is a chance of frost or ice forming, the UVC6000 must be drained to prevent frost-related damaged! Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...
Page 18
- Consult the frequency invertor user manual for the correct solution Check for any signs of damage on the electrical Ø Water filter components and wiring - Replace or repair any damaged components Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...
Page 20
The 400V Tera series feature a lifting eye on each side of the fan casing. The rotation and tilt retainer pins should be engaged prior to lifting. Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...
Page 22
The lifting points are only for temporary lifting and not for Ø long term suspension. If connected remove the grounding pin prior to lifting. Ø Fasten the tilt and rotation retainer pins. Ø Dehaco B.V. • Kruisbaak 25 • 2165 AJ Lisserbroek (NL) • ✆ +31 (0)88 - 20 20 600 • info@dehaco.nl • www.dehaco.nl...